BEHR® Multi-Surface Stain-Blocking Primer & Sealer

Average Rating:
false

For a versatile primer that's excellent for stain-blocking, adhesion and sealing Interior/Exterior surfaces, choose BEHR® Multi-Surface Stain-Blocking Primer & Sealer. This 100% styrene acrylic formula resists medium to heavy stains, and can even be used on metal, aluminum and to cover old oil-based paint. It's also tintable, so it's great when you're looking to make a colour change. This is also a low odour, low VOC formula.


Finish

Dries to a non-reflective sheen which minimizes the appearance of minor surface imperfections.

Best for use in

Over properly prepared uncoated and previously painted interior/exterior surfaces

Coverage

23-37 sq meters per 3.78L


0
PRODUCT USAGE
Clock icon

30 Min Dries to Touch
1 HR Ready to Topcoat

Paint coverage icon.

23-37 m2
Coverage per 3.78L

Soap and water cleaning a paint brush icon

Soap & Water
Clean-Up

Thermometer Icon

Protect
from Freezing

  • Over properly prepared uncoated and previously painted Interior/Exterior surfaces.
  • Ideal for Masonry, Stucco, Drywall, Galvanized Metal, Ferrous Metals, Vinyl, Aluminum, Wood, Concrete and on glossy surfaces or oil-based paint.
  • Bright or deep colours require a tinted primer.
  • Have primer tinted close to topcoat colour with no more than 118 ml of colourant per 3.78L.
Read More

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy and metal surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new masonry stucco, concrete, concrete masonry units (CMUs), and split-faced block to cure for 7 days and test pH prior to applying primer.
  • The pH must be 13.0 or lower before coating.
  • Remove efflorescence with a mixed solution of one part vinegar and one part water, rinse thoroughly with clean water and allow to dry.
  • FOR EXTERIOR SURFACES: For new or uncoated wood, use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.
  • Etch galvanized metal with a concrete and masonry cleaner and etcher. 
Read More

  • Apply when air and surface temperatures are between 35-90°F (2-32°C).
  • Use a high quality 10 - 13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Stir primer occasionally.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 284 ml per 3.78L.
  • Spot prime patched areas first, then follow with a complete primer coat.
  • Two coats may be needed over heavy stains and tannin-rich wood.
  • On stained surfaces, topcoat in 4 hours; for heavy stains, topcoat in 16 hours.
  • Topcoat within 30 days.
Read More

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

 

Read More

Reviews

Often Bought Together
PREMIUM PLUS<sup>®</sup> Interior Flat
PREMIUM PLUS® Interior Flat
Learn More
BEHR PREMIUM<sup>®</sup> Alkyd Semi-Gloss Enamel
BEHR PREMIUM® Alkyd Semi-Gloss Enamel
Learn More
How-To

Find step-by-step instructions in our how-to articles and videos.

MSDS AND DATA SHEET

WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.​

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.