BEHR PREMIUM PLUS® Exterior Flat

Avg. Rating:

For a classic look on your home's exterior walls, choose BEHR PREMIUM PLUS® Exterior Flat paint. This traditional, non-reflective matte sheen minimizes surface imperfections on wood and vinyl siding. It provides excellent touch-up to help maintain the look, and it can also be used on stucco, brick and other masonry, as well as fences.

FOR TINT BASES – DO NOT USE WITHOUT THE ADDITION OF TINTING COLOURANTS


Finish

A flat paint sheen is non-reflective sheen that's easy to apply and touch up. It will minimize the appearance of minor surface imperfections.

Best For Use In

Wood and vinyl walls and siding; Brick and other masonry; Fences

Coverage

23-37 m2

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time 
    2 HR Recoat Time

  • Paint coverage icon.

    23-37 m2
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Ideal for Wood, Vinyl and Fiber Cement Sidings; Stucco, Brick, Masonry and Fences.

Preparation

  • Use on properly prepared and cleaned coated and uncoated Exterior surfaces.
  • Countersink nailheads, fill and sand smooth.
  • Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash.
  • Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood.
  • Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals.
  • Rinse and allow to dry.
  • Caulk windows, doors and other openings.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.

Read More

Prime†

  • Use a product such as BEHR® Multi-Surface Primer & Sealer No. 436.
  • For optimal colour development, better hide, and to reduce the number of topcoats with deep colours denoted with a dagger (†) on the colour chip, apply a custom tinted primer.
  • For best results, prime all metal surfaces before painting.
  • Prime all metal surfaces before painting.

Read More

Application

  • Apply when air and surface temperatures are between 2-32°C.
  • Stir paint occasionally.
  • Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or airless sprayer (.015-.021" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require more than one coat for complete hide. Darker colours may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant. When applying to vinyl, colour choice must be the same colour or lighter than the existing colour. Do not use on floors.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

Reviews

Compare Behr Sheens

  • Stucco / Masonry / Brick
  • Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
  • Doors / Windows / Shutters
  • Garage Doors / Gutters
  • Soffit / Fascia / Eaves
WARRANTY

LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec: This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591 or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.