Specialty Barn and Fence Paint for Your Project

PRODUCT USAGE

2-3 HR Dry Time
6-8 HR
Recoat Time

18.5-46.5 m²
Coverage

Soap & Water
Clean-Up

Protect
from Freezing

Where to Use

Smooth or rough-sawn exterior vertical wood surfaces such as Plywood, Fences, Shingles, Shakes, Siding and Laminates. Not for use on horizontal surfaces subject to foot traffic. Dry film will not harm livestock.

Preparation

Proper surface preparation is required

Remove stains caused by mold and mildew with a mold and mildew stain removing product.

Previously painted, stained or clear sealed wood

Sand all glossy surfaces.
If surface is in good condition, apply directly over clean, dry surface.
If the latex or oil-based finish has started to crack, peel or flake, use a product such as BEHR PREMIUM^® NO. 64 Wood Stain & Finish Stripper on wood to remove the coating. Rinse thoroughly.
Follow with a product such as BEHR PREMIUM NO. 63 All-In-One Wood Cleaner. Scrub, rinse, and allow to dry completely.

New, weathered, pressure treated or uncoated wood

Place cloth duct tape in random areas on the bare wood. Press the tape firmly then quickly remove it.
If wood fibers or debris are pulled onto the tape, the wood surface is not sound and additional preparation is required as follows: Clean surface with a product such as BEHR PREMIUM NO. 64 Wood Stain & Finish Stripper. Rinse.
Follow with a product such as BEHR PREMIUM NO. 63 All-In-One Wood Cleaner at full strength to remove mill glaze and/or loose wood fibers, dirt and other debris. Rinse and allow to dry.

Application

Use when air and surface temperature are 10-32˚C.
Do not apply in direct sunlight or if rain is expected within 24 hours.
Wood surfaces must be completely dry.
When working with more than one container of the same colour, intermix to ensure colour uniformity.
Redwood, Cedar, Cypress and other “bleeding” woods contain water soluble extractives which may cause discolouration of white and pastel colours; therefore prime the above type woods with one coat of a product such as BEHR ® NO. 436 Multi-Surface Primer & Sealer to reduce these stains.
Apply with a nylon/polyester brush on smooth surfaces. On rough-sawn or textured wood apply with a 3/4" long nap roller or high-quality airless sprayer. For airless spraying use a .015" tip. Keep a wet edge to reduce lapping and help control colour uniformity.
Always back-brush or back-roll during all application methods.
Two coats may be necessary for complete hiding. Apply the second coat only after the first coat has thoroughly dried.

Dry Time

Longer dry time required in cooler temperatures and higher humidity.

Disposal

For disposal of empty containers and unused product contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

BEHR^® Barn & Fence Paint

Reviews

BEHR® Barn & Fence Paint

Reviews

BEHR^® Barn & Fence Paint