BEHR® Solid Colour House & Fence Wood Stain
Get all the best features of oil and latex with BEHR's Solid Colour House & Fence Wood Stain. This exterior formula creates a durable film that resists cracking and peeling on your home's vertical surfaces. It's available in more than 1,600 custom and computer-matched colours, and is also great on stucco, brick and cement siding.
See Our Selection of Solid Colours.
ALWAYS ADD TINTING COLOURANTS BEFORE USING.
Finish
Provides a film that is highly resistant to cracking, peeling, blistering, weathering, chalking & erosion.
Best For Use In
Smooth or rough sawn exterior vertical wood surfaces such as: Plywood, Fences, Patio Covers, Shingles, Shakes, Siding, Laminates, Barns and Masonry & Stucco Surfaces.
Coverage
1st Coat 19-37 m2 ; 2nd Coat 24-47 m2
PRODUCT USAGE
-
Must Prep
Before Staining -
2 Thin Coats
Recommended -
1st Coat
19-37 m2
2nd Coat
24-47 m2 -
Soap & Water
Clean-Up
THE FOLLOWING STEPS AND PRODUCTS ARE RECOMMENDED FOR BEST RESULTS.
- Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
- BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
- When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus.
- Rinse thoroughly and allow to dry before coating. On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.
Application
- Must apply between 5-32˚C. Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
- No primer needed on most woods. However, Redwood, Cedar, Cypress and other “bleeding” woods contain water soluble extractives which may cause discolouration of white and pastel colours; therefore prime the above type woods with one coat of a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Purpose Primer & Sealer.
- See label for additional instructions. Intermix multiple containers to ensure colour uniformity
- Apply with a nylon/polyester brush. Use a 10 mm nap roller for smooth/semi-smooth surfaces. On rough-sawn or textured wood apply with a 19 mm long nap roller or high quality airless sprayer.
- For airless spraying use For airless spraying use a .38 mm - .48 mm (.015 - .019") tip. Pump Sprayer not recommended. Always back-brush or back-roll during all application methods.
- Keep a wet edge to reduce lapping and help control colour uniformity.
- Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily.
- Two coats may be necessary for complete hiding. Apply a thinner second coat after the first coat has thoroughly dried.
Read More
Disposal
- For disposal of empty containers and unused product, contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
Often Bought Together
WARRANTY
Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 10 years on vertical surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. Colour fading and slight natural greying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label, during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
