BEHR PREMIUM® Wood Stain & Finish Stripper
A great finish begins with the right start. BEHR PREMIUM Wood Stain & Finish Stripper will give your wood surface a new lease on life by stripping away old stains & finishes. This allows your new coating to penetrate the wood and achieve long lasting durability.
FOLLOW WITH BEHR PREMIUM ALL-IN-ONE WOOD CLEANER.
Finish
Thick finish that lifts old stains or coating leaving your wood surface looking fresh and clean
Best For Use In
Exterior latex, oil-based and 100% acrylic coatings on Wood Decks, Porches & Patios, Siding, Fences, Shakes and Shingles.
Coverage
4-13 m2
PRODUCT USAGE
-
Coverage:
4-13 m2 -
Shake Well
Before Use -
Soap & Water
Clean-Up
Exterior latex, oil-based and 100% acrylic coatings on Wood Decks, Porches & Patios, Siding, Fences, Shakes and Shingles.
Preparation
- Removes loose wood fibers without sanding. Not for interior use or on aluminum surfaces. May harm bare metal or painted surfaces.
- Be sure to have a source for water, hose with nozzle and stiff bristle broom or brush and a product such as BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner.
- DO NOT THIN PRODUCT. Do not apply in direct sunlight or on hot surfaces. Dampen nearby foliage with water and cover with plastic drop cloths.
- Wear protective clothing, goggles, acid resistant gloves, and NIOSH approved Respirator
- Conduct a small test patch in an inconspicuous area to ensure product performance.
- Prevent all rinse solution from entering storm drains.
Read More
Application
- Must apply between 5-32˚ C.
- Pour BEHR Premium NO. 64 Wood Stain & Finish Stripper directly onto surface and apply liberally using a nylon/poly brush or roller.
- Natural bristle brushes or lambs wool applicators are not recommended.
- Due to product thickness, DO NOT use pump, paint or other sprayers. Product will clog tip, resulting in leaking and dripping.
- Always keep surface wet by misting with water and re-apply NO. 64 if drying occurs.
- Finish will begin to lift from the surface.
- Repeat process as needed to keep the surface wet during the removal period.
- Most deteriorated finishes will start to lift after about 5-45 minutes.
- The coating should easily rinse off when ready.
- When the finish starts to lift, scrub the surface using a stiff bristle broom or brush.
- Rinse thoroughly with water from garden hose using nozzle at normal pressure, or use a pressure washer at a low setting (500-1200 PSI or 35-84 kg/cm2).
- DO NOT USE HIGH PRESSURE as this may harm the wood. If some of the old finish remains on the surface, repeat application procedure or spot sand as needed.
- FOLLOW UP WITH A PRODUCT SUCH AS BEHR PREMIUM NO. 63 ALL-IN-ONE WOOD CLEANER TO REMOVE STAINS, REJUVENATE NATURAL WOOD COLOUR AND TO NEUTRALIZE THE STRIPPING ACTION.
Read More
Dry Time
- Surfaces must be thoroughly dry before applying any type of new finish, except those finishes that can be applied to dampened wood. Allow the wood to dry for a minimum of 24 hours in warm, dry weather.
Read More
Disposal
- Biodegradable. Properly dispose of all soiled rags. To recycle or properly dispose of paint in your community, contact your household refuse collection service. PROTECT FROM FREEZING.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
