BEHR MARQUEE^® Ceiling Paint

Avg. Rating:

Behr's most advanced ceiling paint features guaranteed one-coat hide^◆ plus an exclusive BEHR DYNASTY® & MARQUEE® Interior One-Coat Colour Collection. This 100% acrylic, antimicrobial-mildew resistant finish makes MARQUEE Ceiling Paint ideal for every room.

Learn about the BEHR DYNASTY® & MARQUEE® Interior One-Coat Colour Collection Guarantee.

Click here to find out if MARQUEE Ceiling Paint is available in a Home Depot® nearest you.

Now comes with the new SIMPLE POUR Lid. Read about how this innovative lid helps you and get our best tips for using it.

^◊A primer coat may be needed on some surfaces. See label for details.

^◆Valid only when tinted to colours from the BEHR DYNASTY® & MARQUEE® Interior One-Coat Hide Colour Collection. Learn more.

Finish

A ceiling flat with a gloss level of <3 at 16° C and sheen of <3 at 29° C

Best For Use In

Properly prepared coated and uncoated Interior Ceilings. For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Coverage

Up to 37 m²

PRODUCT USAGE

1 HR Dry Time
2 HR Recoat Time
Up to 37 m²
Coverage
Soap & Water
Clean-Up
Protect
from Freezing

Where to Use

Properly prepared coated and uncoated Interior Ceilings. For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Preparation

Properly prepare and clean all surfaces.
Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
Remove mildew stains with a mildew stain remover.
Scuff sand glossy surfaces and repair imperfections.
Remove all dust with a damp cloth, allow to dry.

Prime

Use MARQUEE Paint as a primer for properly prepared uncoated, glossy, porous or repaired ceilings.

STAINED SURFACES:

Lock in water stains with MARQUEE Ceiling Paint as a spot primer.
For heavy stains, test for stain bleed-through by applying MARQUEE Ceiling Paint to a small section.
If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
If bleeding continues, a longer dry time is needed before topcoating.

Application

Apply when air and surface temperatures are between 10-32°C.
Stir paint occasionally.
Intermix containers of same product to ensure colour and sheen uniformity.
Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
Popcorn style acoustic ceilings; use acoustic ceiling roller cover (13-19 mm nap) or airless sprayer (.015-.019" spray tip, 60 mesh filter).
Allow new stucco, plaster and masonry to cure for 30 days before painting.
Darker colours may require additional dry time between coats.
Cooler temperatures or higher humidity may prolong drying time.

Disposal

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

MSDS AND DATA SHEET

BEHR MARQUEE^® Ceiling Paint

Pure White No. 1458

See Full MSDS, Product Data & Safety

WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

WHICH MEASUREMENT SYSTEM DO YOU PREFER?

HOW BIG IS YOUR ROOM?

Length (ft)

Width (ft)

HOW MANY DOORS AND WINDOWS?

Doors

Windows

EXTRAS (SELECT ALL THAT APPLY)

HOW BIG IS YOUR HOUSE?

SQ. FT.

Openings

Doors

Garage Doors

Windows

Shutters

EXTRAS

HOW BIG IS YOUR WOOD STAIN PROJECT?

Approximate Square Footage Enter your project's approximate size below

Length (ft)

Width (ft)

HOW BIG IS YOUR FLOOR COATINGS PROJECT?

Approximate Square Footage

Enter your project's approximate size below

Length (ft)

Width (ft)

Back

HERE'S HOW MUCH YOU'LL NEED

WALLS

0 Gallons + 0 Quarts

(Per coat)

TRIMS

0 Gallons + 0 Quarts

(Per coat)

DOORS

0 Gallons + 0 Quarts

(Per coat)

CEILING

0 Gallons + 0 Quarts

(Per coat)

EXTERIOR WALLS

0 Gallons + 0 Quarts

(Per coat)

DOORS

0 Gallons + 0 Quarts

(Per coat)

TRIM

0 Gallons + 0 Quarts

(Per coat)

SHUTTERS

0 Gallons + 0 Quarts

(Per coat)

GARAGE DOORS

0 Gallons + 0 Quarts

(Per coat)

DECKOVER STAIN

0 Gallons (total)
0 Gal/Coat

2 coats required

SOLID COLOUR WOOD STAIN

0 Gallons (total)
0 Gal/Coat

2 coats recommended

SOLID COLOUR HOUSE & FENCE STAIN

0 Gallons (total)
0 Gal/Coat

2 coats recommended

SEMI-TRANSPARENT WOOD STAIN

0 Gallons (total)
0 Gal/Coat

2 coats required

TRANSPARENT WOOD STAIN

0 Gallons (total)
0 Gal/Coat

2 coats required

PORCH & PATIO FLOOR PAINT

0 Gallons (total)
0 Gal/Coat

2 coats required

CONCRETE & GARAGE FLOOR PAINT

0 Gallons (total)
0 Gal/Coat

2 coats required

CONCRETE DYE

0 Gallons (total)
0 Gal/Coat

2 coats required

GRANITE GRIP

0 Gallons (total)
0 Gal/Coat

2 coats required

CONCRETE STAIN

0 Gallons (total)
0 Gal/Coat

2 coats required

* Important Disclaimer: Coverage calculator results are to be used only as estimates. Behr Process Corporation cannot guarantee that you will achieve proper results without verifying your measurements and assumptions.

About Interior Paint Sheens

Get the look you want and the protection you need for any room in your home.

A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.

Applications:

Low-traffic areas; interior walls and ceilings

Durability:

Medium-Low

A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.

Applications:

Low-traffic areas; interior walls

Areas:

Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings

An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.

Applications:

Moderate-traffic areas

Areas:

Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms

A satin enamel sheen has a pearl-like finish that's easy to clean.

Applications:

All interior surfaces; moderate- to high-traffic areas

Areas:

Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture

Durability:

Medium-High

A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.

Applications:

Cabinets and trim; high-traffic, high-moisture areas

Areas:

Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters

Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.

Applications:

High-use surfaces

Areas:

Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture

About Exterior Paint Sheens

Set the right curb appeal with exterior painting efforts that last.

A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.

Applications:

Wood and vinyl walls and siding; brick and other masonry; fences

Durability:

Medium-Low

A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.

Applications:

Virtually all exterior surfaces

Durability:

Medium-High

A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.

Applications:

Doors, trim and shutters; Exterior furniture

Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.

Applications:

High-use surfaces

Please enter your email address. If it is on file, please check your inbox for an email with a link to update your password.

Fields in bold with an asterisk (*) are required. See our privacy policy.

BEHR MARQUEE^® Ceiling Paint

Finish

Best For Use In

Coverage