PREMIUM PLUS® Interior Ceiling Paint

Average Rating:
false

For a paint specifically designed to take on a variety of ceiling surfaces, choose BEHR PREMIUM PLUS Interior Ceiling Paint. This flat, non-reflective sheen is spatter-resistant, and will maintain the original acoustical properties of your ceiling.


Finish

A flat sheen has a matte, non-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.

Best for use in

Primed or painted Interior Ceilings.

Coverage

23-37 m2


0
PRODUCT USAGE
Clock icon

1 HR Dry Time
2 HR Recoat Time

Paint coverage icon.

23-37 m2
Coverage

Soap and water cleaning a paint brush icon

Soap & Water
Clean-Up

Thermometer Icon

Protect
from Freezing

Primed or painted Interior Ceilings.

Read More

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.
Read More

  • Use a product such as BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer No. 75
  • On new drywall in low-moisture rooms, use a product such as BEHR® Drywall Plus Primer & Sealer No. 73.
  • For optimal colour development, better hide, and to reduce the number of topcoats with deep colours denoted with a dagger (†) on the colour chip, apply a custom tinted primer.

 

Read More

  • Use product when the surface and air temperatures are between 10-32ºC.
  • Stir paint occasionally. Intermix containers of the same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015”-.019” spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require more than one coat for complete hide.
  • Darker colours may require additional dry time between coats.
  • Popcorn style acoustic ceilings, use acoustic ceiling roller cover or airless sprayer (.015-.017 spray tip).
  • Cooler temperatures or higher humidity may prolong drying time.
Read More

  • Dries to touch in one hour at 25ºC and 50% humidity, recoat in 2 hours. Longer dry time required in cooler temperatures and in higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant
Read More

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.
Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Reviews

Often Bought Together
BEHR<sup>®</sup> Drywall Primer & Sealer
BEHR® Drywall Primer & Sealer
Learn More
BEHR<sup>®</sup> Kitchen, Bath & Trim Stain-Blocking Primer & Sealer
BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer
Learn More
BEHR<sup>®</sup> Multi-Surface Stain-Blocking Primer & Sealer
BEHR® Multi-Surface Stain-Blocking Primer & Sealer
Learn More
BEHR SWIPES<sup>™</sup> Wall Wipes
BEHR SWIPES Wall Wipes
Learn More
How-To

Find step-by-step instructions in our how-to articles and videos.

MSDS AND DATA SHEET

WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.​

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.