BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer

Average Rating:
false

For excellent performance under any paint sheen, choose BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer. This self-leveling acrylic blend helps create a uniform topcoat sheen, so it's ideal for multiple surfaces, including metal, vinyl, concrete and glossy surfaces. It blocks medium to heavy stains, and it's tintable to allow for dramatic colour changes. This is also a low odor formula.


Finish

The self-leveling acrylic blend helps create a uniform topcoat sheen.

Best for use in

Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint.

Coverage

23-37 sq. meters per 3.78L


100144295
PRODUCT USAGE
Clock icon

30 Min Dries to Touch
1 HR Ready to Topcoat

Paint coverage icon.

23-37 sq meters
(250-400 Sq. Ft)
Coverage

Soap and water cleaning a paint brush icon

Soap & Water
Clean-Up

Thermometer Icon

Protect
from Freezing

  • Over properly prepared uncoated and previous painted Interior surfaces.
  • Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint.
  • Works under all sheens; recommended under SATIN, SEMI-GLOSS and HI-GLOSS paint.
  • Bright or deep colours require a tinted primer.
  • Have primer tinted close to topcoat colour with no more than 118 mL of colourant per 3.79 . 
Read More

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming. 
Read More

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Use a high-quality 10-13 mm nap roller cover, nylon polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Stir occasionally.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 237 mL per 3.79 L.
  • Spot prime patched areas first, follow with a complete primer coat.
  • Heavy stains may require two coats.
  • On stained surfaces, topcoat in 4 hours; for heavy stains, topcoat in 16 hours.
Read More

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More

Reviews

Often Bought Together
BEHR PREMIUM<sup>®</sup> Cabinet & Trim Semi-Gloss Enamel
BEHR PREMIUM® Cabinet & Trim Semi-Gloss Enamel
Learn More
How-To

Find step-by-step instructions in our how-to articles and videos.

MSDS AND DATA SHEET

WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.​

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.