BEHR MARQUEE® Exterior Satin Enamel

Average Rating:
false

For the ultimate in durability and beauty on virtually any Exterior surface, choose BEHR MARQUEE Exterior Satin Enamel paint. This luxurious sheen creates a pearl-like appearance that also resists dirt, so it's ideal for your home's siding as well as doors, windows, trim and outdoor furniture. It's also great for challenging surfaces like shutters, railings and wrought iron.

Now comes with the new SIMPLE POUR Lid.  Read about how this innovative lid helps you and get our best tips for using it.


Finish

A satin sheen creates a pearl-like finish that’s durable and dirt-resistant. It will also resist moisture, fading and stains.

Best for use in

Virtually all Exterior surfaces. Do not use on floors.

Coverage

23-37 m2


0
PRODUCT USAGE
Clock icon

1 HR Dry Time 
2 HR Recoat Time

Paint coverage icon.

23-37 m2
Coverage

Soap and water cleaning a paint brush icon

Soap & Water
Clean-Up

Thermometer Icon

Protect
from Freezing

Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Protection for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel and Fences.  Do not use on floors.

Read More

  • Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals. Rinse and allow to dry.
  • Caulk windows, doors and other openings.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR MARQUEE paint as a primer for repaired or uncoated surfaces, including woods that contain tannins and heavily stained areas (two primer coats required for redwood and cedar).
  • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR MARQUEE.
  • For drastic colour changes or when applying deep colours denoted with a dagger (†) on the colour chip, apply a tinted primer coat of BEHR MARQUEE, if needed.
Read More

  • Apply product on dry substrates when air and surface temperatures are between 2°-32°C and will remain between 2°-32°C for at least 4 hours after applying.
  • Allow paint film to dry for at least 60 minutes prior to rain showers when temperatures are between 15°-21° C and 60-70% relative humidity. Lower temperatures, higher humidity or deep colours may increase dry time and/or rain resistance time.
  • Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015 -.021" spray tip, 60 mesh filter).
  • On rough surfaces, use a high quality 19-25 mm nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L
  • Certain colours may require more than one coat for complete hide.
  • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
  • When applying to vinyl, colour choice must be the same colour or lighter than the existing colour.
  • Do not use on floors.
Read More

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More

Reviews

Compare Behr Sheens
BEST FOR
BEHR MARQUEE<sup>®</sup> Exterior Flat
BEHR MARQUEE® Exterior Flat
Learn More
BEHR MARQUEE<sup>®</sup> Exterior Flat - Stucco / Masonry / Brick
BEHR MARQUEE<sup>®</sup> Exterior Flat - Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
BEHR MARQUEE<sup>®</sup> Exterior Flat - Garage Doors / Gutters
BEHR MARQUEE<sup>®</sup> Exterior Flat - Soffit / Fascia / Eaves
BEHR MARQUEE<sup>®</sup> Exterior Satin Enamel
BEHR MARQUEE® Exterior Satin Enamel
Learn More
BEHR MARQUEE<sup>®</sup> Exterior Satin Enamel - Stucco / Masonry / Brick
BEHR MARQUEE<sup>®</sup> Exterior Satin Enamel - Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
BEHR MARQUEE<sup>®</sup> Exterior Satin Enamel - Doors / Windows / Shutters
BEHR MARQUEE<sup>®</sup> Exterior Satin Enamel - Garage Doors / Gutters
BEHR MARQUEE<sup>®</sup> Exterior Satin Enamel - Soffit / Fascia / Eaves
BEHR MARQUEE<sup>®</sup> Exterior Semi-Gloss Enamel
BEHR MARQUEE® Exterior Semi-Gloss Enamel
Learn More
BEHR MARQUEE<sup>®</sup> Exterior Semi-Gloss Enamel - Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
BEHR MARQUEE<sup>®</sup> Exterior Semi-Gloss Enamel - Doors / Windows / Shutters
BEHR MARQUEE<sup>®</sup> Exterior Semi-Gloss Enamel - Garage Doors / Gutters
BEHR MARQUEE<sup>®</sup> Exterior Semi-Gloss Enamel - Soffit / Fascia / Eaves
BEST FOR
How-To

Find step-by-step instructions in our how-to articles and videos.

MSDS AND DATA SHEET

WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.​

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.