PREMIUM PLUS^® Texture Paint

Where to Use

Primed or low-sheen surfaces. Smooth and Sand Finishes ideal for walls and ceilings in Living Rooms, Dining Rooms, Bedrooms, Hallways and Kitchens.

Preparation

• Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
• Scuff sand glossy surfaces.
• Countersink nailheads, repair imperfections and sand smooth.
• Remove all dust with a damp cloth and allow to dry.
• Allow new stucco, plaster and masonry to cure for 30 days before priming.

Prime

• Use a product such as BEHR PREMIUM PLUS^® All-In-One Primer & Sealer No.75. On new drywall in low-moisture rooms, use a product such as BEHR PREMIUM PLUS^® Drywall Primer & Sealer No.73

Application

• Use product when the surface and air temperatures are between 10-32°C.
• Stir thoroughly prior to use. Coverage is 9-18 sq. m. per 7.58 L (100-200 sq. ft. per 2 gallon container) depending on application technique and surface condition.



•  Initial Application:

• Apply a thin coat to a 1.2m x 1.2m (4' x 4') area using a looped roller.
• Continue to work in a 1.2m x 1.2m (4' x 4') sections until the entire surface is complete.
• Allow to dry at least 4 hours. If necessary, apply a second coat using the same process. Note: additional coats will increase textured effect.



•  Designer Texture Effect:

• Apply product to a 1.2m x 1.2m section using a looped roller and allow to set 5 minutes. Follow the specific technique instructions in the BEHR PREMIUM PLUS^® Texture Paint guide.
• Continue to work in 1.2m x 1.2m sections and overlap slightly into the existing section until the entire surface is complete. Allow to dry at least 4 hours.
• Once the texture finish has dried 24-48 hours, to change colour and increase durability, apply PREMIUM PLUS All-In-One Primer & Sealer No.75 and topcoat with BEHR PREMIUM PLUS paint. Refer to paint label for further instruction.

Dry Time

• Dries to touch in 4 hours at 23°C and 50% humidity. Longer dry time required in cooler temperatures and in higher humidity.
• Surface will fully cure in 1 week.

Clean Up & Storage

• Use soap and water.
• Properly dispose of all soiled rags and protect unused product from freezing.
• For disposal of unused paint products, please contact your household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

LIMITED WARRANTY Behr Process Corporation warrants that this product meets Behr's manufacturing specifications. If this product does not meet these specifications, contact Behr Process Corporation at 2750 Centre Avenue, NE, Calgary, AB T2A or at the number 1-800-661-1591. Behr will, at its option and upon proof of purchase, either furnish an equivalent amount of a new product to you or refund the purchase price of this product. Behr will not be responsible for (1) labour and costs of labour for removal or application of any product; or (2) any incidental or consequential damages, whether based upon breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This express warranty may be extended by a provincial consumer protection statute.