Remove the cap
Make a quarter-turn counter-clockwise to remove the cap.
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
* Important Disclaimer: Coverage calculator results are to be used only as estimates. Behr Process Corporation cannot guarantee that you will achieve proper results without verifying your measurements and assumptions.
...and goodbye to messy pouring. The BEHR® Simple Pour lid comes with an attachable spout for a more precise pour, every time.
See how the Simple Pour Lid allows you to pour with ease in this quick video tutorial.
If you would like to see the step-by-step instructions, please refer to the "How to use" section below.
The BEHR® Simple Pour Lid & Spout were designed with your painting convenience in mind.
Notched end (1) fits onto cap for easier twist off. Spout wings (2) help align and screw spout to cap opening.
Simply twist to remove the cap (3). You can also use a traditional paint key (5) to open the full lid.
The eco-friendly can and lid (4) are made out of 100% recycled plastic material.
Once your painting project is complete, clean the spout, wipe excess paint from the cap opening and reseal the paint can by replacing the twist cap or lid, helping the paint remain fresher longer.
Find your perfect BEHR colour. Visit homedepot.ca to order samples and pick up in-store.
Make a quarter-turn counter-clockwise to remove the cap.
Or - use the notched end of the spout as a tool to remove cap, turning counter-clockwise.
The Simple Pour Spout threads onto the cap with a clockwise turn. Use 2 plastic wings on side of spout to properly tighten.
Pour paint using any side of the spout and slowly bring paint can back up to its upright position to avoid any drips.
After pouring the paint, use a paper towel or cloth to turn the spout counter-clockwise and remove the spout. Clean spout and save for next use.
Wipe off any excess paint from the rim of the cap opening and reseal the cap by turning it clockwise.
If needed, entire lid can be removed with a paint key or screwdriver. Remember to always wipe excess paint from the rim of the can before tapping the lid back in place with a rubber mallet or hammer.
You'll never miss out on the best Behr promotions, products and news.
Fields with an asterisk (*) are required. See our privacy policy
Enter your email address to opt-out of Behr emails.
Fields with an asterisk (*) are required. See our privacy policy
Never miss out on the hottest deals and latest news from BEHR.