BEHR® Masonry, Stucco & Brick Paint - Flat
A high-quality, flat acrylic latex paint with excellent hiding properties. This int/ext, self-priming, mildew resistant finish also provides excellent adhesion & water repellency on properly prepared int/ext smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 yrs. in all climatic conditions and cleans up with soap & water.
READY TO USE OR ADD TINTING COLOURANTS
Click Here to see available colours.
Finish
Flat Finish
Best For Use In
Properly prepared Interior or Exterior vertical surfaces as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal.
Coverage
Rough: 23-28 m2 ; Smooth 37 m2
PRODUCT USAGE
-
2 Coats
Required -
4-6 HR Dry Time
24 HR Recoat Time -
7-12 m2
-
Soap & Water
Clean-Up
Properly prepared exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block or Brick as well as adjacent Wood and Metal surfaces. Not for use on horizontal surfaces subject to foot traffic.
Preparation
- Allow new stucco and masonry to cure for 30 days before painting.
- Remove all loose, peeling paint. Power wash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
- Remove mildew stains with a mildew stain removing product.
- On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
- Cracks and gaps wider than 1.5 mm should be routed open, dusted and patched with an elastomeric patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
- Prime all uncoated, patched, chalky, wood and/or metal surfaces with a product such as BEHR® NO. 436 Exterior Multi-Surface Primer & Sealer.
Read More
Application
- DO NOT THIN.
- Intermix all cans of same product to ensure colour uniformity. Stir paint before and occasionally during application.
- Use product when air and surface temperature are 10-32˚C. Do not use if rain or heavy dew is expected within 24 hours.
- Apply using a high quality 32 mm nap roller, nylon/polyester brush or airless sprayer (.025"-.029" spray tip).
- A second coat must be applied at the same spread rate as the first.
- A third coat may be required to achieve a final dry mil thickness of about 10-15 mils.
- If airless spraying, use equipment with a minimum of 2,500 PSI at the tip. Maintain a wet edge to avoid lap marks.
- Do not re-spread or re-work paint.
Read More
Dry Time
- Longer dry time required in cooler temperatures and higher humidity.
- After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Read More
Disposal
- Properly dispose of all soiled rags and protect unused product from freezing.
- For disposal of empty containers and unused product contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 20 years from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
