BEHR ULTRA SCUFF DEFENSE Interior Satin Enamel

Avg. Rating:

Elevate the look of your interior surfaces with this paint that dries to a lush, iridescent finish and features our premium BEHR ULTRA SCUFF DEFENSE Formula for extra protection in your home’s high-traffic areas but also great for adding colour to trim, doors, cabinets and indoor furniture.

A primer coat may be needed on some surfaces. See label for details.


Finish

A Satin sheen creates a pearl-like finish that’s scuff-resistant, durable and dirt-resistant.

Best For Use In

Ideal for All Rooms

Coverage

23-37 m2

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time 
    2 HR Recoat Time

  • Paint coverage icon.

    23-37 m2
    Coverage

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared coated and uncoated Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings.

Preparation & Prime†

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR ULTRA SCUFF DEFENSE as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with BEHR ULTRA SCUFF DEFENSE Paint as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR ULTRA SCUFF DEFENSE Paint to a small section. If stain bleeds through, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before topcoating.
  • For drastic colour changes or when applying deep colours denoted with a dagger (†) on the colour chip, apply a tinted primer coat of BEHR ULTRA SCUFF DEFENSE Paint if needed.

Read More

Application

  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally.
  • Intermix containers of same product to ensure colour and sheen uniformity.
  • Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
  • Certain colours may require additional coats for complete hide.
  • Darker colours may require additional dry time between coats.
  • Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • Do not use on floors.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Read More

Reviews

Compare Behr Sheens

  • High Traffic Areas
  • Family Rooms / Living Rooms / Bedrooms
  • Dining Rooms / Offices
  • Kids’ Rooms / Hallways
  • Kitchens / Bathrooms
  • Cabinets / Trim / Furniture
  • Ceiling
  • Doors / Windows / Shutters
BEHR ULTRA SCUFF DEFENSE Interior Extra Durable Flat Learn More
BEHR ULTRA SCUFF DEFENSE Interior Eggshell Enamel Learn More
BEHR ULTRA SCUFF DEFENSE Interior Satin Enamel Learn More
BEHR ULTRA SCUFF DEFENSE Interior Semi-Gloss Enamel Learn More
WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.