BEHR DYNASTY Interior Eggshell Enamel

Avg. Rating:

BEHR DYNASTY™ Paint & Primer Interior Eggshell Enamel is our most advanced interior paint. A high-performance paint & primer, BEHR DYNASTY is everything you want in a paint all rolled into one, repelling stains and resisting scuffs with the one-coat coverage you expect from our most premium paint line. Combined with our BEHR DYNASTY & MARQUEE® One-Coat Colour Collection colour options, BEHR DYNASTY delivers our toughest durability to provide you with a worry-free painting experience. Learn More.

Now comes with the new SIMPLE POUR Lid. Read about how this innovative lid helps you and get our best tips for using it.

A primer coat may be needed on some surfaces. See back label for details.

Valid only when tinted to colours from the BEHR DYNASTY™ & MARQUEE® Interior One-Coat Hide Colour Collection. Learn more.


An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime as well as mildew.

Best For Use In

Ideal for Every Room


Up to 37 m2

  • Clock icon

    1 HR Dry Time
    2 HR Recoat Time

  • Paint coverage icon.

    Up to 37 m2

  • Soap and water cleaning a paint brush icon

    Soap & Water

  • Thermometer Icon

    from Freezing

Ideal for every room and provides a durable velvety appearance.


  • Properly prepare and clean all surfaces.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain remover.
  • Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR DYNASTY Paint as a primer for uncoated, porous or repaired interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar).


  • Lock in stains with BEHR DYNASTY Paint as a spot primer.
  • For heavy stains, test for stain bleed-through by applying BEHR DYNASTY Paint to a small section.
  • If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
  • If bleeding continues, a longer dry time is needed before topcoating.

Read More


  • Apply when air and surface temperatures are between 10-32°C.
  • Stir paint occasionally. Intermix containers of the same product to ensure colour and sheen uniformity.
  • Use a high-quality 10-13 mm nap roller cover, nylon/polyester brush, or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 237 ml per 3.75 L.
  • Fully saturate roller for best coverage.
  • Untinted ULTRA PURE WHITE® and colours outside of the BEHR DYNASTY & MARQUEE Interior One-Coat Colour Collection may require more than one coat to achieve complete hide and a uniform finish.
  • Darker colours may require additional dry time.
  • Longer dry time required in cooler temperatures and higher humidity.
  • After 1 week, cured paint film may be cleaned with a mild, non-abrasive liquid detergent
  • Dry paint film is mildew resistant.
  • Do not use on floors.

Read More


  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Read More


Compare Behr Sheens

  • High Traffic Areas
  • Family Rooms / Living Rooms / Bedrooms
  • Dining Rooms / Offices
  • Kids’ Rooms / Hallways
  • Kitchens / Bathrooms
  • Doors / Windows / Shutters
  • Cabinets / Trim / Furniture
BEHR DYNASTY Interior Matte Learn More
BEHR DYNASTY Interior Eggshell Enamel Learn More
BEHR DYNASTY Interior Semi-Gloss Enamel Learn More
BEHR DYNASTY Interior Satin Enamel Learn More

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 

To consult with a Behr Paint Company Representative, call 1-800-854-0133 Ext. 2 (U.S.A. only).