BEHR® Acrylic-Alkyd Enamel Undercoater

Avg. Rating:

For excellent performance under higher sheen paints, choose BEHR® Acrylic-Alkyd Enamel Undercoater. It is specially formulated to have outstanding flow and leveling application similar to oil-based primers, but with easy soap and water clean-up. This product has a quick dry time and blocks medium to heavy tannin stains – making it an ideal primer choice for painting doors, trim, and cabinets.


Finish

Dries to a non-reflective finish which helps create a smooth topcoat appearance.

Best For Use In

Wood, Ferrous Metals, Drywall, Vinyl, and on Glossy Surfaces or Oil-Based Paint

Coverage

23-37 sq meters per 3.78L

PRODUCT USAGE
  • Clock icon

    30 Min Dries to touch
    1 Hr Ready to Topcoat

  • Paint coverage icon.

    23 - 37 Sq. Meters
    Coverage per 3.78L

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Over properly prepared uncoated and previously painted Interior/Exterior surfaces.
  • Ideal for Wood, Ferrous Metals, Drywall, Vinyl, and on glossy surfaces or oil-based paint.
  • Bright or deep colours require a tinted primer.
  • Have primer tinted close to topcoat colour with no more than 118 ml of colourant per 3.78L.

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy and metal surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • FOR EXTERIOR SURFACES: For new or uncoated wood, use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner.

Read More

Application

  • Apply when air and surface temperatures are between 2-32°C (35-90°F).
  • Use a high quality 6-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Stir primer occasionally.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 284 ml per 3.78L.
  • Spot prime patched areas first, follow with a complete primer coat.
  • Two coats may be needed over stains and woods that contain tannins.
  • On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.
  • Topcoat within 30 days.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Read More

Reviews

Often Bought Together

BEHR PREMIUM® Alkyd Semi-Gloss Enamel
Learn More
WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.