BEHR PREMIUM® Porch & Patio Paint & Primer In One Floor Paint
Durable Paint and Primer in One Formula that resists scuffing, fading, cracking and peeling. This low-lustre finish is mildew resistant and 100% Acrylic. Available in custom colours.
Finish
A Low-Luster Enamel finish that is mildew resistant for protection and enhancement of your porch and patio floors.
Best For Use In
On properly prepared, previously painted or primed Interior/Exterior surfaces. Ideal for Porches, Floors, Decks, Basement Floors, Patios, Siding, Trim, Furniture and Trellises. Do not use on areas subject to automotive tires
Coverage
Up to 37 m2
-
Rough Surface
Up to 7-12 m2
Smooth Surface
Up to 9-14 m2 -
2 Hours
Dry To Touch
2-4 Hours
Recoat -
Clean-Up:
Soap & Water -
Protect:
from Freezing
This product is ideal for porches, floors, decks, basements, patios, and ramps. Not for use on garage floors or areas subject to automotive traffic. Use on previously painted or primed interior or exterior surfaces such as: Wood, Concrete, or Composite Wood.
Preparation
- New or Weathered Wood: Use a product such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner. Lightly sand to remove remaining wood fibers/fuzz.
- Note: WARNING! Sanding or scraping pressure treated lumber may be hazardous; wear appropriate protection.
- Painted Surfaces-Wood: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating. Scuff sand glossy surfaces. Use stainless steel or galvanized nails to prevent nail staining. Countersink nail heads, repair imperfections and sand smooth. Remove all dust with a damp cloth, allow to dry.
- Uncoated Concrete or Masonry Surfaces: Allow new surfaces to cure 30 days. Clean and etch surface using a product such as BEHR PREMIUM
- Painted Surfaces-Concrete: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper such as BEHR PREMIUM® No. 992 Concrete & Masonry Paint Stripper to remove old coating or scrape/sand down to a sound concrete surface. Scuff sand glossy surfaces. Clean and spot etch any exposed concrete. Remove all dust with a damp cloth, allow to dry.
Read More
Prime
- Interior Wood: Use a product such as BEHR® No. 75 Kitchen, Bath & Trim Stain-Blocking Primer & Sealer
- Exterior Wood: Use a product such as BEHR® No. 436 Multi-Surface Primer & Sealer.
- Interior/Exterior Concrete or Masonry: Over uncoated concrete or masonry surfaces, use a product such as BEHR PREMIUM® No. 880 Concrete & Masonry Bonding Primer.
Read More
Application
- Brush: Nylon/polyester
- Roller: 10 mm nap roller, depending on surface texture
- Spray: Texture sprayer capable of 1.0GPM with a 3 mm tip. Do not use with airless sprayer. Thinning: Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 236 ml per 3.78 L.
- Dry Time: 10-32° C & 50% Relativity Humidity To Touch: 2 hours, To Recoat: 2-4 hours
- Dry times are temperature, humidity, and film thickness dependent.
Read More
Disposal
- Clean all tools and equipment with clean water. Properly dispose of all soiled rags. For disposal of empty containers and unused product, contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
Reviews
SDS AND DATA SHEET
BEHR PREMIUM® Porch & Patio Paint & Primer In One Floor Paint
See Full SDS, Product Data & SafetyWARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
