BEHR PREMIUM® Granite Grip™

Average Rating:

A premium drivable floor coating offering a unique multi-speckled finish for horizontal concrete & masonry surfaces. It fills in hairline cracks and resists hot tire pick-up, dirt, grease and household stains. Use this coating to transform weathered concrete surfaces into a decorative granite look with a protective long lasting finish.

Click Here to see available colours.

NOTE:  Must use with 3 mm Adhesive Roller Cover.

Unique multi-speckled textured flat finish.
Best for use in
Interior/Exterior horizontal concrete and masonry surfaces
Rough: 4-5 m2 ; Smooth: 5-6 m2 for 2 coats

Read important application instructions to ensure optimum paint performance.

Pink and purple colored brush strokes

Find Your Perfect Colour!

Find, Coordinate & Preview Paint Colours

Explore our colour library. Browse our collections of popular and trending colours.  Find coordinating colours then preview them in your own virtual room image. Do it all with ColourSmart by BEHR®.

Explore Colour Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Light blue and light green brush strokes

Product Usage

Concrete square feet coverage icon

2 Coat Coverage
Rough: 4-5 m2
Smooth: 5-6 m2

Two paint brushes icons.

2 Coats

Clock icon

Dry Time:
1 Hr. Dry to Touch
3-4 Hr. Recoat

Soap and water cleaning a paint brush icon

Soap & Water

Where to Use

Interior/Exterior surfaces such as: Porous Concrete, Masonry, Stone and Brick. Ideal for horizontal surfaces such as: Garage Floors, Driveways, Walkways, Patios, Porches and Pool Decks. 

Surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.


Usage Summary
Where Not to Use

DO NOT use on vertical surfaces or areas subject to hydrostatic pressure. NOT for industrial use or areas subject to forklifts. 


Proper surface preparation is required.

  • All surfaces must be clean, sound, dry and free of any dirt, oil and grease. 

For Uncoated Concrete or Masonry:

  • Allow new surfaces to cure 30 days. 
  • Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured proile similar to 150 grit sandpaper. 

For Previously Coated Surfaces: 

  • For a painted surface in sound condition, use a product to clean and prepare the surface. 
  • If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. 
  • Scuff sand glossy surfaces. 
  • Clean and spot etch any exposed concrete. 
  • Remove all dust with a damp cloth, allow to dry.
  • Intermix all cans of same product to ensure colour uniformity.  Stir before applying. 
  • Use product when air and surface temperatures are between 10-32° c. 
  • Do not apply in direct sunlight. 
  • For hairline cracks up to 3mm, completely fill in with coating using a nylon/polyester brush and allow to dry completely prior to roller application. 
  • Do not pour product directly on surface; always use a roller tray.
  • Apply a first coat using a 3 mm" Adhesive Roller Cover or nylon/polyester brush. 
    • NOTE: The first coat will act as the base coat and it will not completely cover the surface by design. 
  • Avoid over application on the first coat.
  • Apply in 1m x 1m, sections. 
  • Begin with the roller in the center of the section and roll outwards in random directions.
  • Avoid regular patterns and knock down hard edges using the roller. 
  • Allow first coat to dry then apply second coat in the same method as the first coat. 
  • While two coats are necessary, additional coats may help hide previous surface imperfections or cover over dark colours. 
  • For large projects, consider using a texture sprayer with a 4mm tip. Spray in 1m x 1m sections and back roll with an adhesive roller cover. 
  • An annual touch-up may be required in areas subject to tire traffic.
Dry Time
  • Longer dry time required in cooler temperatures and in higher humidity. 
  • The floor may be subjected to light foot traffic after 24 hours. 
  • Allow 72 hours before subjecting surface to automotive tires, heavy foot traffic or repositioning furniture. 
  • Premature heavy traffic will cause paint failure requiring spot recoating.
Clean Up
  • Soap & water clean-up.
  • Wait at least 30 days before rinsing or cleaning. 
  • Use a mild detergent as needed. 
  • Abrasive cleaners and pressure-washers should be used carefully to avoid premature coating failure. 
  • Properly dispose of all soiled rags. 
  • To recycle or properly dispose of product in your community, contact your household refuse collection service.

Read Application Instructions


For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

BEHR PREMIUM® Granite Grip™ is rated 3.8 out of 5 by 127.
Rated 5 out of 5 by from Great Job! We painted our front steps with this to make our entryway look complete. It gave an elegant look to the steps. I taped around the railing and along the brick with painter's tape to keep a neat edge. The consistency is that of cream of what so there is a learning curve to its application. I followed the instructions to the letter. I took the can to the store and had it mixed the evening before I was going to use it. Very pleased with the results so far.
Date published: 2019-06-10
  • y_2019, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_127
  • loc_en_US, sid_1014000650-E_CA, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 156ms


Find step-by step instructions in our how-to articles and videos.