KILZ^® 1 STANDARD No. L2011

Where to UseBlank space if empty.

Use KILZ 1 STANDARD Primer on almost all interior surfaces including wood, drywall, plaster, brick, masonry and more. Not recommended for flooring, glossy surfaces, mold and mildew prone surfaces or for stainblocking.

Surface Preparation*Blank space if empty.

The following steps are recommended for product performance.

• ACover all nail and screw heads with joint compound according to directions and sand to smooth surface.*
• Tape drywall and apply joint compound. Allow to fully cure according to directions prior to priming.
• Sand to smooth surface before priming.*
• Wipe off dust with a damp cloth. Allow to dry thoroughly.

ApplicationBlank space if empty.

• Eye protection is recommended.
• Use only when temperatures are between 10° C and 32° C.
• Coverage is approximately 28 – 37 m²  per 3.79 L depending on surface porosity.
• For airless spray applications, tip size should be .017" - .021". 60 mesh filter.
• May be tinted with up to 60 ml of universal colourant per 3.79 L container.
• Glossy Surfaces: Not recommended. Please use KILZ PREMIUM, KILZ RESTORATION, KILZ ADHESION or KILZ oil-based primers.
• Masonry, Brick, Stucco and Plaster: Not recommended. Please use KILZ PREMIUM or KILZ 2 Primers. Stainblocking: Not formulated to block stains - For stainblocking, use oil-based primers like KILZ ORIGINAL and water-based primers like KILZ 2 or KILZ PREMIUM.

Dry TimeBlank space if empty.

• Dries to touch in 30 minutes at 25°C and 50% humidity.
• Application at lower temperatures, high humidity or poor ventilation will affect dry time.
• Paint or topcoat after 2 hours.

Clean Up & DisposalBlank space if empty.

• Use soap and water to clean hands, tools, and spills.
• For recycling or disposal of empty containers and unused product, contact your household refuse collection service.

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.