BEHR PREMIUM^® Concrete & Masonry Bonding Primer No. 880

Where to UseBlank space if empty.

Use on uncoated Interior or Exterior surfaces such as: Concrete, Masonry and any Porous Stone or Brick. Not designed for use on wood, metal or silicone treated surfaces. Do not use on coated surfaces. Use only on porous surfaces. NOTE: SOME SURFACES MAY APPEAR SLIGHTLY DARKER AFTER PRODUCT DRIES.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

The following steps are required

• New concrete must cure for a minimum of 30 days prior to priming.
• Patch all holes and cracks and allow to dry. For touch-ups where surface coatings have failed, completely remove any loose or peeling paint.
• Do not apply over previously coated surfaces.
• To completely strip previous coatings, use concrete & masonry paint stripper product.
• For proper penetration and adhesion of primer, use a concrete & masonry cleaner & etcher product.

ApplicationBlank space if empty.

• DO NOT THIN. Stir primer thoroughly before and occasionally during application.
• Use product when air and surface temperatures are between 10-32°C.
• Apply using a high quality pump sprayer, 10-13 mm nap roller, nylon/polyester brush or a pad applicator.

Dry TimeBlank space if empty.

• Longer dry time required in cooler temperatures and in higher humidity
• Must apply a topcoat after at least 4 hours, but before 30 days.

DisposalBlank space if empty.

• Do not use soap and water to clean brushes or other applicators as they will become gummy.
• Properly dispose of all soiled rags.
• To recycle or properly dispose of product in your community, contact your household refuse collection service.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.