BEHR^® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer No. 75

Where to UseBlank space if empty.

Over properly prepared uncoated and previous painted Interior surfaces. Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

• All surfaces should be properly prepared and cleaned.
• Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
• Remove mildew stains with a mildew stain removing product.
• Scuff sand glossy surfaces and repair imperfections.
• Remove all dust with a damp cloth, allow to dry.
• Allow new stucco, plaster and masonry to cure for 30 days before priming.

ApplicationBlank space if empty.

• Apply when air and surface temperatures are between 10-32°C.
• Use a high quality 10-13 mm nap roller cover, nylon polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
• Stir occasionally. Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L.
• Heavy stains may require two coats. Spot prime patched areas first, follow with a complete primer coat.
• Bright or deep colours require a tinted primer.
• Have primer tinted close to topcoat colour with no more than 4 ounces of colourant per gallon.
• † On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.

DisposalBlank space if empty.

• For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Blank space if empty.

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.