BEHR PREMIUM® Porch & Patio Anti-Slip Floor Paint - Textured Low-Lustre Enamel No. 6250
BEHR PREMIUM Porch & Patio Anti-Slip Floor Paint is a 100% acrylic textured low-lustre enamel that is ideal for interior/exterior applications on wood and concrete porches, patios, pool decks and walkways. It provides a mildew resistant paint finish that resists cracking and peeling, as well as withstands scuffing and fading.
Safety Data Sheets
Finish
A textured Low-Lustre Enamel finish that is slip-resistant for safety and enhancement of your porch and patio floors.
Best For Use In
Wood and concrete surfaces such as Porches, Patios, Walkways, Pool Decks, and Ramps. Do not use on areas subject to automotive tires.
Coverage
Rough: Up to 7-12 m2
Smooth: Up to 9-14 m2
-
Spread Rate:
Rough Up to 7-12 m2
Smooth Up to 9-14 m2 -
Dry Time:
2 hours dry to touch
2-4 hours recoat -
Clean-Up:
Soap & Water -
Protect:
from Freezing
This product is ideal for porches, floors, decks, basements, patios, and ramps. Not for use on garage floors or areas subject to automotive traffic. Use on previously painted or primed interior or exterior surfaces such as: Wood, Concrete, or Composite Wood.
Preparation
- New or Weathered Wood: Use a product such as BEHR PREMIUM® No. 63. All-In-One Wood CleanerLightly sand to remove remaining wood fibers/fuzz.
- Note: WARNING! Sanding or scraping pressure treated lumber may be hazardous; wear appropriate protection.
- Painted Surfaces-Wood: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating. Scuff sand glossy surfaces. Use stainless steel or galvanized nails to prevent nail staining. Countersink nail heads, repair imperfections and sand smooth. Remove all dust with a damp cloth, allow to dry.
- Uncoated Concrete or Masonry Surfaces: Allow new surfaces to cure 30 days. Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer’s label directions) to achieve a textured profile similar to 150 grit sandpaper. Wipe your fingers over the clean, dry floor to check for dust or powder. Ensure there is no residue on your fingers that may have been left from the etcher. If residue is found, rinse the surface to remove residue. Allow the surface to dry completely. Sprinkle a few drops of water onto the surface. If water is quickly absorbed and the surface feels like 150 grit sandpaper, the surface is ready. If not, re-etch.
- Painted Surfaces-Concrete: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. Scuff sand glossy surfaces. Clean and spot etch any exposed concrete. Remove all dust with a damp cloth, allow to dry.
Read More
Prime
- Interior Wood: Use a product such as BEHR® No. 75 Kitchen, Bath & Trim Stain-Blocking Primer & Sealer
- Exterior Wood: Use a product such as BEHR® No. 436 Multi-Surface Primer & Sealer.
- Interior/Exterior Concrete or Masonry: Over uncoated concrete or masonry surfaces, use a product such as BEHR PREMIUM® No. 880 Concrete & Masonry Bonding Primer.
Read More
Application
- Brush: Nylon/polyester
- Roller: 10 mm nap roller, depending on surface texture
- pray: Texture sprayer capable of 1.0GPM with a 3 mm tip. Do not use with airless sprayer. Thinning: Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 236 ml per 3.78 L.
- Dry Time: 10-32° C & 50% Relativity Humidity To Touch: 2 hours, To Recoat: 2-4 hours
- Dry times are temperature, humidity, and film thickness dependent.
Read More
Disposal
- Clean all tools and equipment with clean water. Properly dispose of all soiled rags. For disposal of empty containers and unused product, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Read More
Reviews
PAINTING CONTRACTORS
Professional products and services specifically designed for residential and commercial painting contractors.
FOR CONTRACTORS
PROPERTY & FACILITY MANAGERS
A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.
FOR PROPERTY MANAGERSREADY TO GET STARTED?
CONTACT A BEHR PRO® REP
Your reputation depends on your ability to do the job right. BEHR can help.
Find a rep
JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM
Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.
About Interior Paint Sheens
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
About Exterior Paint Sheens
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Get 10%-20% back in quarterly rewards on BEHR® Products when you join Home Depot's Pro Xtra™ loyalty program
- Call, Text or E-mail your orders to your dedicated BEHR PRO Paint Specialist
- Arrange will call & Schedule Deliveries for pick-up at your Home Depot location or for delivery to you
