BEHR PREMIUM^® Solid Colour Concrete Stain No. 800

Where to UseBlank space if empty.

Properly prepared Interior or Exterior surfaces such as: Concrete, Masonry Walls, Basements, Patios, Sidewalks, Driveways*, Garage Floors*, Tennis Courts, Cement Blocks, Pillars and Brick. Not for use on surfaces subject to hydrostatic pressure.

• * Driveways and Garage Floors - Lack of proper surface preparation and/ or over-application can lead to automobile tires lifting the product from the surface.
• CAUTION: Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Use a product such as BEHR PREMIUM^® NON-SKID NO. 970 to help prevent slipping.

Usage SummaryBlank space if empty.

Preparation & PrimeBlank space if empty.

New and Uncoated Concrete or Masonry Surfaces:

• New concrete must cure for a minimum of 30 days.
• For proper penetration and adhesion of the topcoat, use a concrete & masonry cleaner and etcher product to clean and etch the surface. Remove mildew stains with a mildew stain removing product. Follow all label instructions.
• Apply a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase the adhesion of topcoat to the surface. Follow all label instructions.

Painted, Stained or Sealed Concrete:

• Option 1- To completely strip the entire surface, use a concrete & masonry paint stripper product.
• Option 2- To recoat over an existing coating, remove any loose or peeling paint and scuff sand the surface.
• Use a Concrete & Masonry Degreaser and Cleaner product to clean previously coated surfaces in sound condition.
• Use a Concrete & Masonry Cleaner and Etcher product to clean and etch any bare concrete surface. Follow all label instructions.
• Spot prime all uncoated areas with a product such as BEHR PREMIUM Concrete & Masonry Bonding Primer No. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Dry TimeBlank space if empty.

• Longer dry time required in cooler temperatures and in higher humidity.
• Allow 24 hours for light foot traffic.
• Park tires on corrugated cardboard for 14 days after applying stain. After two weeks, dry stained surface may be cleaned with a mild, non-abrasive liquid detergent.

DisposalBlank space if empty.

• To recycle or properly dispose of product in your community, contact your household refuse collection service.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.