AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR ULTRA Exterior Satin Enamel No. 9850

Avg. Rating:

To create a subtle touch of style that looks great on a variety of exterior surfaces, choose BEHR ULTRA Exterior Satin Enamel. This sheen will give your home's siding, trim and fences a pearl-like finish that also looks great on doors, trim and masonry.

AVAILABLE IN OVER 2,500 COLOURS
Find the perfect colour for all your clients project. Explore Colours

Technical Data Sheets

Product Certifications & Declarations

Finish

Satin Finish

Best For Use In

Virtually all Exterior surfaces.

Coverage

23-37 m2 per 3.79 L

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time 
    2 HR Recoat Time

  • Paint coverage icon.

    23-37 m2 
    Coverage per 3.79 L

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel, and Fences.

Preparation & Prime†

  • Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals. Rinse and allow to dry.
  • Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR ULTRA™ paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR ULTRA.
  • For drastic colour changes or when applying deep colours denoted with a dagger (†) on the colour chip, apply a tinted primer coat of BEHR ULTRA if needed.

Read More

Application

  • Apply product on dry substrates when air and surface temperatures are between 2°-32°C and will remain between 2°-32°C for at least 4 hours after applying.
  • Allow paint film to dry for at least 60 minutes prior to rain showers when temperatures are between 15°-21° C and 60-70% relative humidity. Lower temperatures, higher humidity or deep colours may increase dry time and/or rain resistance time.
  • Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015 -.021" spray tip, 60 mesh filter).
  • On rough surfaces, use a high quality 19-25 mm nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L
  • Certain colours may require more than one coat for complete hide.
  • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
  • When applying to vinyl, colour choice must be the same colour or lighter than the existing colour.
  • Do not use on floors.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Read More

WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process Corporation at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

On the Job logo

HEAR WHAT PROS ARE SAYING ABOUT BEHR

"BEHR ULTRA® Exterior Paints delivers exceptional hide and excellent dirt pick-up resistance."

-CHRIS, PRO-TECH PAINTING

On the Job logo

HEAR WHAT PROS ARE SAYING ABOUT BEHR

"BEHR ULTRA® Exterior Paints delivers exceptional hide and excellent dirt pick-up resistance."

-CHRIS, PRO-TECH PAINTING

Reviews

Compare Behr Sheens

  • Stucco / Masonry / Brick
  • Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
  • Doors / Windows / Shutters
  • Garage Doors / Gutters
  • Soffit / Fascia / Eaves
Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca