AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM PLUS® Texture Paint

Avg. Rating:

This white texture paint is easy to apply, ideal for hiding imperfections and is reinforced with interwoven fibers for added durability.

Safety Data Sheets

Finish

Creates a Smooth, Sand, and Popcorn Finish

Best For Use In

Living Rooms, Dining Rooms, Bedrooms, Hallways, and Ceilings.

Coverage

9-18 m2 per 7.58 L

PRODUCT USAGE

Primed or low-sheen surfaces. Smooth and Sand Finishes ideal for walls and ceilings in Living Rooms, Dining Rooms, Bedrooms, Hallways and Kitchens.

Preparation

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth and allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.

Read More

Prime

  • Use a product such as BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No.75. On new drywall in low-moisture rooms, use a product such as BEHR Drywall Plus Primer & Sealer No.73

Read More

Application

  • Use product when the surface and air temperatures are between 10-32°C.
  • Stir thoroughly prior to use. Coverage is 9-18 sq. m. per 7.58 L (100-200 sq. ft. per 2 gallon container) depending on application technique and surface condition.

INITIAL APPLICATION:

  • Apply a thin coat to a 1.2m x 1.2m (4' x 4') area using a looped roller.
  • Continue to work in a 1.2m x 1.2m (4' x 4') sections until the entire surface is complete.
  • Allow to dry at least 4 hours. If necessary, apply a second coat using the same process. NOTE: ADDITIONAL COATS WILL INCREASE TEXTURED EFFECT.

DESIGNER TEXTURE EFFECT:

  • Apply product to a 1.2m x 1.2m section using a looped roller and allow to set 5 minutes. Follow the specific technique instructions in the BEHR PREMIUM PLUS® Texture Paint guide.
  • Continue to work in 1.2m x 1.2m sections and overlap slightly into the existing section until the entire surface is complete. Allow to dry at least 4 hours.
  • Once the texture finish has dried 24-48 hours, to change colour and increase durability, apply BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No.75. and topcoat with BEHR PREMIUM PLUS paint. Refer to paint label for further instruction.

Read More

DRY TIME

  • Dries to touch in 4 hours at 23°C and 50% humidity. Longer dry time required in cooler temperatures and in higher humidity.
  • Surface will fully cure in 1 week.

Read More

CLEAN UP & STORAGE

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at #110 – 600 Barlow Square SE, Calgary, AB, T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca