AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM Hammered Spray Paint No. B0609

Avg. Rating:

BEHR PREMIUM Hammered Spray Paint & Primer delivers a unique, hand-hammered, glossy look to your indoor and outdoor projects. This luxurious and bold finish enhances kitchen and bath accents, craft décor and outdoor accessories, bringing your small projects to life. With an ergonomically shaped spray can, BEHR PREMIUM Hammered Spray Paint & Primer is easy and comfortable to use and provides a durable finish that helps protect against weather and rust.

Finish

Gloss Finish

Best For Use In

Designed for both indoor and outdoor use. BEHR PREMIUM™ Spray Paint can be used on wood, metal, plastic, cast stone, and more

Coverage

1.1 m2 per can

Tools & Resources

PRODUCT USAGE
  • Thermometer Icon

    Protect
    from Freezing

  • Clock icon

    15-30 Min. Dry to Touch
    1 hr or greater
    than 24 Recoat time

  • Paint coverage icon.

    Up to 1.4 m2
    Coverage

  • Mineral Spirits Icon

    Mineral Spirits
    Clean-up

Use on properly prepared surfaces such as:

  • Wood
  • Metal 
  • Plastic
  • Cast stone
  • Wicker

Preparation

  • The surface must be clean, free of dust, grease, wax, peeling paint, mold or mildew. If washing is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
  • †Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.
  • * Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before painting.

†WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.

empty-paragraph

Read More

Application

  • Eye protection is recommended.
  • For best results, use at room temperature. Cover adjacent areas to protect from overspray.
  • Shake can vigorously for 1 minute after mixing ball begins to rattle and often during use. Hold can upright, moving from side-to-side while spraying lightly and evenly about 20-30 cm (8"-12") from area being painted.
  • Apply thin coats to avoid runs and sags. Recoat within 1 hour or after 24 hours.
  • Dries to touch in 15-30 min. Cooler temperatures or higher humidity may prolong drying time.
  • Use BEHR® Primer for enhanced adhesion over bare wood and metal.

Read More

Clean-up & Disposal

  • Clear spray valve immediately after use by turning can upside down and spraying until only clear gas is released. If spray nozzle becomes clogged, remove and clean.
  • Do not stick pins or wire into can opening.
  • Clean fresh overspray with mineral spirits or paint thinner. Remove dried paint with paint remover, but test small area first to ensure paint remover does not damage substrate.
  • Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca