AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM® Semi-Transparent Waterproofing Stain & Sealer No. 5077

Avg. Rating:

Enhance your wood's natural patterns while providing increased protection from the elements. This 100% acrylic formula seals out the elements, and sun's harmful UV rays, for up to 6 yrs. on decks and up to 8 yrs. on fences & siding. It's available in 60 custom colours to help you create a look that's as beautiful as it is durable.

See Our Selection of Semi-Transparent Colours.

Finish

Semi-Transparent film that enhances the wood's natural patterns.

Best For Use In

For properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure).

Coverage

1st Coat: 23-28 m2
2nd Coat: 46-56 m2

PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Staining

  • Two paint rollers, two coat icon.

    2 Thin Coats 
    Required

  • Spread rate icon

    1st Coat
    23-28 m2
    2nd Coat
    46-56 m2

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Recommended for properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Preparation

(The following steps and products are recommended for best results.)

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
  • BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
  • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating.
  • On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

Read More

Application

(For best results, a pad applicator is recommended over large areas.)

  • Must apply between 5-32˚C. Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
  • Intermix multiple containers to ensure colour uniformity. DO NOT THIN PRODUCT. Stir product occasionally throughout application. Test product for penetration and colour on a small hidden area before proceeding.
  • Use a nylon/polyester brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only.
  • Use 10 mm nap or longer when appropriate. A high quality pump sprayer with a variable tip or an airless sprayer with a .38 mm - .48 mm (.015 - .019") tip may be used.
  • Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the stain.
  • Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
  • Over application of stain will lead to surface failure including peeling and cracking.
  • Avoid applying stain too heavily. Two thin coats required.
  • For optimum performance, coat all six sides of wood.

Read More

Dry Time

  • 1-2 hours before recoat. Allow 72 hours for full cure.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Read More

WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 8 years on vertical surfaces and 6 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS.  Colour fading and slight natural greying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca