AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR DECKplus® Semi-Transparent Waterproofing Stain and Sealer Penetrating Oil No. 4633

Avg. Rating:

BEHR DECKplus Semi-Transparent Waterproofing Wood Stain & Sealer is a penetrating oil-based stain that beautifies and protects your exterior wood surfaces. This product is available in popular exterior premix colours and can also be tinted to a range of other exterior colours. This product is ideal for both horizontal and vertical surfaces. After application, this product will resist rain after 4 hours which provides project flexibility during unsure weather conditions.

 

Technical Data Sheets

Finish

Semi-Transparent film that enhances the wood's natural patterns.

Best For Use In

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as Decks, Railings, Shakes, Shingles, Siding, Fences, and Wood Patio Furniture.

Coverage

23-28 m2 per 3.78 L depending on wood porosity.

PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Applying
    Wood Finish

  • Pad applicator icon.

    1 Coat Application

  • Wood square feet coverage icon

    Spread Rate:
    Covers 23-28 m2

     

  • Mineral Spirits Icon

    Clean-Up:
    Mineral Spirits
    or Paint Thinner

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Preparation

PROPER SURFACE PREPARATION IS REQUIRED.

  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer.
  • When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 60 cm away from the surface. Allow the area to dry at least 24 hours before coating.
  • Lightly sand to remove remaining wood fibers/fuzz.

Read More

Application

For best results, a pad applicator is recommended over large deck areas.

  • Must apply between 5-32 ̊ C. *Do not apply if rain is expected within 4 hours of product application. Resists rain 4 hours after application.
  • Avoid applying in direct sunlight or to hot surfaces. Do not use if rain is expected within 24 hours.
  • The surface must be completely dry before application. Intermix multiple containers to ensure colour uniformity.
  • Stir product occasionally throughout application. Test product for penetration and colour on a small hidden area before proceeding.
  • Use a natural bristle brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only.
  • Use 10 mm nap or longer when appropriate. Lightly saturate the surface and back-brush any excess finish.
  • Be sure to eliminate puddling and evenly distribute the finish. Maintain a wet edge when applying.
  • Apply product end-to-end or to board lengths to prevent lap marks. Avoid applying stain too heavily. One coat application.
  • For optimum performance, coat all accessible sides.

Read More

Maintenance

  • When the colour has faded and water is readily absorbed by the substrate, prep/clean with a product such as BEHR PREMIUM No. 63, allow to dry, and apply a new/fresh coat of wood finish.
  • Product can be applied annually if needed.

Read More

Dry Time

  • Dry to touch after 2-4 hours depending on wood porosity.
  • 24-48 hours before foot traffic.
  • 72 hours for full cure.

Read More

Disposal

  • For disposal of empty containers and unused product contact your household refuse collection service.

Read More

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process LLC at 110-600 Barlow Square S.E. Calgary, Alberta T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca