AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR® MASONRY, STUCCO & BRICK PAINT - FLAT NO. 270

Avg. Rating:

A high-quality, flat acrylic latex paint with excellent hiding properties. This int/ext, self-priming, mildew resistant finish also provides excellent adhesion & water repellency on properly prepared int/ext smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 yrs. in all climatic conditions and cleans up with soap & water.

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Flat Finish

Best For Use In

Properly prepared Interior or Exterior vertical surfaces as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal.

Coverage

Rough: 23-37 m2
Smooth: 37 m2 per 3.79 L

PRODUCT USAGE
  • Clock icon

    2-3 HR Dry Time 
    4 HR Recoat Time

  • Paint coverage icon.

    23-37 m2 
    Coverage per 3.79 L

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Preparation

  • Allow new stucco and masonry to cure for 30 days before painting.
  • Remove all loose, peeling paint. Power wash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
  • Remove mildew stains with a mildew stain removing product.
  • On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
  • Cracks and gaps wider than 1.5 mm should be routed open, dusted and patched with a quality patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
  • If chalk remains on the surface, prime with a product such as BEHR® NO. 436 Exterior Multi-Surface Primer & Sealer.
  • Prime all patched areas as well as adjacent wood and metal surfaces.
  • If previously sealed or coated, check manufacturer's specifications before painting.

Read More

Application

  • DO NOT THIN.
  • Intermix all cans of same product to ensure colour uniformity.
  • Stir paint before and occasionally during application.
  • Use product when air and surface temperature are 10-32˚C. Do not use if rain or heavy dew is expected within 24 hours.
  • Apply using a high quality 19-25 mm nap roller, nylon/polyester brush or airless sprayer (.015"-.017" spray tip).
  • Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.
  • Do not re-spread or re-work paint.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Read More

Disposal

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product contact your household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

WARRANTY

LIMITED WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 20 years from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca