BEHR PREMIUM® Concrete & Masonry Cleaner & Etcher No. 991
Start your project with the BEHR PREMIUM Concrete & Masonry Cleaner & Etcher to help create a beautiful and long-lasting finish. This indoor/outdoor formula will clean and etch the concrete substrate which allows floor coatings to properly adhere to the surface. This prep product is also great for removing rust and red clay stains.
Safety Data Sheets
BEST IN USE IN
Use on Interior/Exterior uncoated surfaces including Garage Floors, Driveways, Walkways, Patios, Pool Decks and Basement Floors.
COVERAGE
Full Strength: 14-18 m2
Diluted: 28-37 m2
-
Coverage:
Full Strength
14-18 m2
Diluted
28-37 m2 -
Keep Surface Wet
During Use -
Soap & Water
Clean-Up
- Use on Interior/Exterior uncoated surfaces such as: Garage Floors, Driveways, Walkways, Patios, Basement Floors and Concrete Walls.
- Removes grease, oil, auto fluids, rust and red clay stains.
- DO NOT USE ON MARBLE, GRANITE, TERRAZZO, COLOURED CONCRETE, BRASS, BRONZE or COPPER.
- NOTE: If etching is not desired, use a product such as BEHR PREMIUM® CONCRETE & MASONRY DEGREASER & CLEANER NO. 990.
- CAUTION: Surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.
Preparation
THE FOLLOWING ARE REQUIRED
- New concrete must cure for a minimum of 30 days.
- Wipe up all excess oil and grease spills.
- For severe oil or grease stains use a product such as BEHR PREMIUM® NO. 990 Degreaser & Cleaner.
- Remove dirt and loose contaminates.
- Protect grass and any nearby plants by dampening these areas with water and covering with plastic drop cloths.
- Prevent all rinse solution from entering storm drains.
Read More
MIXING
- DO NOT MIX IN A METAL CONTAINER. Use a plastic mixing container, large enough to hold up to 2 gallons of diluted solution.
- Use full strength on hard to clean interior/exterior stained surfaces and smooth concrete. Always work in a well-ventilated area.
- For new and lightly stained concrete or to etch galvanized metal, use a diluted solution of 1 part NO. 991 to 1 part water (1:1 dilution).
- Stir diluted solution thoroughly. Avoid splashing.
Read More
Application
- Wear protective clothing, goggles and acid resistant rubber gloves & boots.
- Avoid splashing. Spraying is not recommended.
- For best results, use a plastic watering can to evenly distribute product or spread product using a stiff bristled, non-metal brush or broom.
- On sloped surfaces, start at the lowest point working up to the highest point.
- Apply to a dry surface for best results.
- Allow product to stand for 10-20 minutes then scrub vigorously.
- Do not let product dry on the surface.
- NOTE: The surface is ready when it feels like medium grit sandpaper and no residue or loose concrete remains on the surface.
- Dense and smooth surfaces may require additional applications.
- Exterior Surfaces: Rinse surface thoroughly with fresh water while scrubbing to properly remove all remaining residue. Remove excess water with a non-metal squeegee or mop.
- Interior Surfaces: Remove residue using a mop and bucket or wet/dry vacuum to minimize the amount of water left on the concrete surface. Allow the surface to completely dry.
- NOTE: Wipe your fingers over the clean floor to cheque for dust or powder. If residue is visible on your fingers, repeat the rinsing step.
Read More
DISPOSAL
- In case of contact with painted or finished surfaces, rinse immediately with fresh water.
- Product will damage automobile finishes. Properly dispose of soiled rags.
- To recycle or properly dispose of product in your community, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process LLC at 110-600 Barlow Square S.E. Calgary, Alberta T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Read More
Reviews
PAINTING CONTRACTORS
Professional products and services specifically designed for residential and commercial painting contractors.
FOR CONTRACTORS
PROPERTY & FACILITY MANAGERS
A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.
FOR PROPERTY MANAGERSREADY TO GET STARTED?
CONTACT A BEHR PRO® REP
Your reputation depends on your ability to do the job right. BEHR can help.
Find a rep
JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM
Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.
About Interior Paint Sheens
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
About Exterior Paint Sheens
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Get 10%-20% back in quarterly rewards on BEHR® Products when you join Home Depot's Pro Xtra™ loyalty program
- Call, Text or E-mail your orders to your dedicated BEHR PRO Paint Specialist
- Arrange will call & Schedule Deliveries for pick-up at your Home Depot location or for delivery to you
