KILZ^®ADHESION No. L2111

Where to UseBlank space if empty.

For use on interior and exterior surfaces. Not recommended for floors or horizontal surfaces subject to prolonged water contact.

Surface PreparationBlank space if empty.

The following steps are recommended for product performance.

• All surfaces must be clean, dry and free of oil, grease, mildew, wax, dust, flaky rust, mill scale, loose paint, chalk and other foreign matter that could interfere with adhesion.
• If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
• Remove loose rust, peeling paint and mill scale with a scraper, wire brush or sandpaper.
• Clean bare metal in accordance with SPC (The Society for Protective Coatings) specifications for the proper surface preparation of metal surfaces.
• Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.
• Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.
• While KILZ ADHESION Primer is formulated to bond without sanding, it is recommended that a small area be tested for adhesion prior to beginning the job.

ApplicationBlank space if empty.

• Wear eye protection.
• Apply using a brush, roller or sprayer.
• Brush – High-quality Nylon/Polyester Roller – High quality 10-13 mm nap on smooth surfaces or 13-19 mm nap on semi-rough or porous surfaces.
• Airless spray – .015-.021 tip / 60 mesh filter @ 2,500–3,200 PSI
• For spray applications, a small amount of water (no more than 240 ml per 3.79 L) may be added.
• Only apply if surface, air, and product temperatures are between 10°-32°C.
• Stir thoroughly before and occasionally during use.
• Prime the entire surface to ensure a uniform appearance of the topcoat.
• Finishing: Topcoat within 30 days to prevent contamination of the primer before painting.
• Tinting: May be tinted with up to 60 mL of universal colorant per 3.79 L. Tinting to a lighter shade than the topcoat is recommended.
• Coverage: 28-37 m² per gallon depending on the application method and surface porosity.

Dry Time @ 25°C / 50% RH:Blank space if empty.

• Touch in 30 minutes
• Paint in 1 hour

† Provided it is allowed to dry for 24 hours before topcoating and tested for compatibility in an inconspicuous area before full coat application.

Clean-up & DisposalBlank space if empty.

• Clean equipment and paint spatters with warm, soapy water.
• Do not dispose of this product down a drain.
• Please consider donating any unused product.
• For recycling or disposal information contact your local household collection service.
• If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current governmental reguations.

To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.