BEHR PREMIUM® DIRECT-TO-METAL SEMI-GLOSS PAINT NO. 3200
BEHR PREMIUM Interior/Exterior Direct-To-Metal Semi-Gloss Paint is engineered for excellent corrosion resistance and adhesion to a variety of properly prepared or primed residential and light commercial metal surfaces. It provides a durable Semi-Gloss finish that withstands tough elements on both interior and exterior surfaces.
Safety Data Sheets
Finish
Semi-Gloss Finish.
Best for use in
Use on properly prepared and cleaned coated and uncoated interior and exterior ferrous and non-ferrous metal surfaces.
Coverage
32-37 m2 per 3.79 L depending on the application method and substrate porosity. It does not include the loss of material from spraying.
-
2 Coats Recommended
-
Rough
32.5-37 m2
Smooth
46.5-51 m2 -
1 HR Dry Time
3 HR Recoat Time
-
Soap & Water
Clean-Up
BEHR PREMIUM Interior/Exterior Direct-To-Metal Paint Semi-Gloss is 100% Acrylic and provides excellent corrosion and flash rust resistance. Engineered for excellent adhesion to a variety of properly prepared or primed residential and light commercial metal surfaces. It provides a durable semi-gloss finish that withstands tough elements on both interior and exterior surfaces.
Where to Use
Use on properly prepared and cleaned coated and uncoated interior and exterior ferrous and non-ferrous metal surfaces. Provides protection for all Metals: Doors, Windows, Trim, Shutters, Fences, Garage Doors, Outdoor Furniture, Railing and Wrought Iron.
Read More
Preparation
Proper surface preparation is required
- All surfaces must be clean, dry, free of rust, dust, dirt, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint and all other foreign substances.
- Mildew: Remove mildew stains with a mildew stain removing product.
- UNPAINTED METAL SURFACES: Ferrous Metals: Use SSPC-SP2. Remove all rust and mill scale using sandpaper, steel wool, abrasive blasting, or other abrading methods to create a profile on the metal’s surface.
- Remove any residue, and clean the metal by scrubbing the surface with a solvent such as mineral spirits or acetone. Bare metal must be coated the same day it is cleaned
- Galvanized Metal, Aluminum & Other Non Ferrous Metals: Use SSPC-SP1. All oil film on new metal must be removed before it is painted.
- Remove oil film with a solvent such as mineral spirits or acetone and remove any residue.
- Sand the surface with sandpaper, steel wool, or by using a chemical etcher.
- Clean by scrubbing the surface with a solvent such as mineral spirits or acetone and remove any residue.
- PREVIOUSLY PAINTED METAL SURFACES: Remove all loose and peeling paint and all other foreign substances.
- Clean any dirt and grease by scrubbing the surface with a solvent such as mineral spirits or acetone and remove any residue.
- Sufficiently sand and dull all smooth, hard, dense or glossy surfaces before coating for maximum performance.
- It is recommended to test a small inconspicuous area for adhesion one week prior to application. If test area shows insufficient adhesion, additional abrasion or complete removal of the previous coating may be required.
- All exterior alkyd surfaces should be primed prior to painting.
Read More
Prime
- UNPAINTED METAL SURFACES: Ferrous Metals: Self priming on properly prepared substrates.
- For best results, use a MPI #107 certified rust-inhibitive, water based primer, such as or BEHR PREMIUM PLUS® Multi-Surface Primer & Sealer No. 436.
- To properly prepare the uncoated surface, please refer to the surface preparation instructions.
- Galvanized Metal, Aluminum & Other Non Ferrous Metals: Use a MPI #134 certified water based primer for galvanized surfaces, such as BEHR PREMIUM PLUS Exterior Multi-Surface Primer & Sealer No. 436.
- To properly prepare the uncoated surface, please refer to the surface preparation instructions.
- PREVIOUSLY PAINTED METAL & GLOSSY SURFACES: Self priming on properly prepared substrates.
- Use a MPI #134 certified water based primer for galvanized surfaces, such as BEHR PREMIUM PLUS Exterior Multi-Surface Primer & Sealer No. 436.
- To properly prepare the uncoated surface, please refer to the surface preparation instructions.
Read More
Application
- DO NOT THIN PRODUCT. Stir before and during application.
- Intermix multiple containers to ensure colour uniformity.
- Use adequate ventilation during application and drying process.
- Certain colours may require 2 or more coats to achieve complete hide and coverage.
- Use product when air and surface temperature are 10-32˚ C, or for exterior when precipitation is expected within 24 hours after project completion.
- Apply a thin coat using a high-quality synthetic brush, 6.35-9.5 mm nap roller or an airless sprayer (0.23-0.43 mm spray tip).
- NOTE: If touch-up is necessary, same application method is recommended.
Read More
Dry Time
- Longer dry time required in cooler temperatures and higher humidity.
- Wait at least 4 weeks before rinsing or cleaning the surface with a mild, non-abrasive detergent.
Read More
Clean Up
- Properly dispose of all soiled rags and protect unused product from freezing.
- For disposal of unused paint products, please contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
WARRANTY
LIMITED WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Read More
Reviews
PAINTING CONTRACTORS
Professional products and services specifically designed for residential and commercial painting contractors.
FOR CONTRACTORS
PROPERTY & FACILITY MANAGERS
A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.
FOR PROPERTY MANAGERSREADY TO GET STARTED?
CONTACT A BEHR PRO® REP
Your reputation depends on your ability to do the job right. BEHR can help.
Find a rep
JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM
Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.
About Interior Paint Sheens
Get the look you want and the protection you need for any room in your home.
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
Low-traffic areas; interior walls and ceilings
Ceilings
Medium-Low
A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
Low-traffic areas; interior walls
Family rooms, living rooms, kids' rooms, bathrooms, dining rooms, ceilings
Medium
An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew.
Moderate-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, dining rooms
Medium
A satin enamel sheen has a pearl-like finish that's easy to clean.
All interior surfaces; moderate- to high-traffic areas
Family rooms, living rooms, bedrooms, kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
Medium-High
A semi-gloss enamel sheen is sleek and radiant resisting mildew, moisture and wear.
Cabinets and trim; high-traffic, high-moisture areas
Kids' rooms, hallways, kitchens, bathrooms, doors, windows, trim, cabinets, shutters
High
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
Kitchens, bathrooms, doors, windows, trim, cabinets, shutters, interior furniture
High
About Exterior Paint Sheens
Set the right curb appeal with exterior painting efforts that last.
A flat sheen is non-reflective, and easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Wood and vinyl walls and siding; brick and other masonry; fences
Medium-Low
A satin enamel sheen creates a pearl-like finish that's durable and dirt-resistant. It will also resist moisture, fading and stains.
Virtually all exterior surfaces
Medium-High
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
Doors, trim and shutters; Exterior furniture
High
Hi-Gloss enamel sheen have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
High-use surfaces
High
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Free Same-Day, Next-Day Delivery*
- Call, Text, or Email Your Paint Order
- Will Call & Schedule Deliveries
- Custom Color Matching
- Product & Record Order Management
- Expert Paint Knowledge
- Get 10%-20% back in quarterly rewards on BEHR® Products when you join Home Depot's Pro Xtra™ loyalty program
- Call, Text or E-mail your orders to your dedicated BEHR PRO Paint Specialist
- Arrange will call & Schedule Deliveries for pick-up at your Home Depot location or for delivery to you
