BEHR PREMIUM® Transparent Log Home Gloss Finish
A unique home deserves a unique look, and Behr's Log Home Gloss Finish can help you get it. This durable and flexible formula moves with the natural expansion and contraction of natural wood surfaces and will also protect from the sun's harmful UV rays. It's available in both clear and cedar finishes and is also great for fences and siding.
FOR HORIZONTAL SURFACES, USE BEHR PREMIUM TRANSPARENT WEATHERPROOFING ALL-IN-ONE WOOD FINISH
Finish
Clear and Cedar finish
Best For Use In
“For Wood Substrates Only” Exterior wood surfaces such as: Log and Timber Frame Homes, Siding, Fencing and Railings.
Coverage
1st Coat: 18-37 m2.; 2nd Coat: 28-37 m2
PRODUCT USAGE
-
Must Prep
Before Applying
Wood Finish -
2 Coats
Required -
1st Coat
18-37 m2
2nd Coat
28-37 m2 -
Soap & Water
Clean-Up
“For Wood Substrates Only” Exterior wood surfaces such as: Log and Timber Frame Homes, Siding, Fencing and Railings. DO NOT USE ON HORIZONTAL SURFACES SUBJECT TO FOOT TRAFFIC.
Preparation
THE FOLLOWING STEPS ARE RECOMMENDED FOR BEST RESULTS.
- Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
- BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
- When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium stains caused by mold, mildew, algae & fungus. On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood.
- Rinse thoroughly and allow to dry before coating.
- Lightly sand any remaining wood fibers/fuzz.
Read More
Application
- Must apply between 4.5-32˚C. Do not use if rain is expected within 24 hours.
- The wood surface must be completely dry before application. Intermix multiple containers to ensure colour uniformity. DO NOT THIN PRODUCT.
- Stir product occasionally throughout application. Test product for colour on a small hidden area before proceeding.
- Use a 3/8" nap roller or nylon/polyester bristle brush. Airless sprayer with a .015 - .019" tip is recommended for experienced applicators only.
- Maintenance re-coating may be achieved by applying 2 coats at a spread rate of 18-37 m2 per gallon over a clean, sound surface.
- Clean and recoat surface when finish no longer has gloss or luster or if the film is broken.
- Thoroughly seal the ends of the boards and all porous areas such as knots with several thin coats.
- Maintain a wet edge when applying. Back-brush during all application methods. Apply product end-to-end or to board lengths to prevent lap marks.
- Over application of finish will lead to surface failure including peeling and cracking. Avoid applying finish too heavily. Avoid applying product in direct sunlight or on to hot surfaces.
Read More
Dry Time
- Dries to touch in 8-12 hours. Recoat after 24 hours. Cool temperatures and/or high humidity will require additional drying time.
Read More
Disposal
- For disposal of empty containers and unused product, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR PREMIUM® Transparent Log Home Gloss Finish
See Full SDS, Product Data & SafetyWARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original residential consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product as described on this label when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process LLC unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process LLC at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
