BEHR PREMIUM PLUS® Texture Paint
This white texture paint is easy to apply, ideal for hiding imperfections and is reinforced with interwoven fibers for added durability.
Finish
Creates a Smooth, Sand, and Popcorn Finish
Best For Use In
Living Rooms, Dining Rooms, Bedrooms, Hallways, and Ceilings.
Coverage
9-18 m2 per 7.58 L
Primed or low-sheen surfaces. Smooth and Sand Finishes ideal for walls and ceilings in Living Rooms, Dining Rooms, Bedrooms, Hallways and Kitchens.
Preparation
- Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
- Scuff sand glossy surfaces.
- Countersink nailheads, repair imperfections and sand smooth.
- Remove all dust with a damp cloth and allow to dry.
- Allow new stucco, plaster and masonry to cure for 30 days before priming.
Read More
Prime
- Use a product such as BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No.75. On new drywall in low-moisture rooms, use a product such as BEHR Drywall Plus Primer & Sealer No.73
Read More
Application
- Use product when the surface and air temperatures are between 10-32°C.
- Stir thoroughly prior to use. Coverage is 9-18 sq. m. per 7.58 L (100-200 sq. ft. per 2 gallon container) depending on application technique and surface condition.
INITIAL APPLICATION:
- Apply a thin coat to a 1.2m x 1.2m (4' x 4') area using a looped roller.
- Continue to work in a 1.2m x 1.2m (4' x 4') sections until the entire surface is complete.
- Allow to dry at least 4 hours. If necessary, apply a second coat using the same process. NOTE: ADDITIONAL COATS WILL INCREASE TEXTURED EFFECT.
DESIGNER TEXTURE EFFECT:
- Apply product to a 1.2m x 1.2m section using a looped roller and allow to set 5 minutes. Follow the specific technique instructions in the BEHR PREMIUM PLUS® Texture Paint guide.
- Continue to work in 1.2m x 1.2m sections and overlap slightly into the existing section until the entire surface is complete. Allow to dry at least 4 hours.
- Once the texture finish has dried 24-48 hours, to change colour and increase durability, apply BEHR® Kitchen, Bath & Trim Interior Stain-Blocking Primer & Sealer No.75. and topcoat with BEHR PREMIUM PLUS paint. Refer to paint label for further instruction.
Read More
DRY TIME
- Dries to touch in 4 hours at 23°C and 50% humidity. Longer dry time required in cooler temperatures and in higher humidity.
- Surface will fully cure in 1 week.
Read More
CLEAN UP & STORAGE
- Use soap and water.
- Properly dispose of all soiled rags and protect unused product from freezing.
- For disposal of unused paint products, please contact your household refuse collection service.
Read More
To consult with a Behr Company Representative, call 1-800-661-1591.
Read More
Read More
Reviews
WARRANTY
LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec: This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591 or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
