BEHR PREMIUM^® Wood Stain & Finish Stripper No. 64

Where to UseBlank space if empty.

Exterior latex, oil-based and 100% acrylic coatings on Wood Decks, Porches & Patios, Siding, Fences, Shakes and Shingles.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

• Removes loose wood fibers without sanding. Not for interior use or on aluminum surfaces. May harm bare metal or painted surfaces.
• Be sure to have a source for water, hose with nozzle and stiff bristle broom or brush, and a product such as BEHR PREMIUM^® NO. 63 All-In-One Wood Cleaner.
• DO NOT THIN PRODUCT. Do not apply in direct sunlight or on hot surfaces. Dampen nearby foliage with water and cover with plastic drop cloths.
• Wear protective clothing, goggles, acid-resistant gloves, and NIOSH approved Respirator
• Conduct a small test patch in an inconspicuous area to ensure product performance.
• Prevent all rinse solution from entering storm drains.

ApplicationBlank space if empty.

• Must apply between 4.5-32˚C. Pour BEHR PREMIUM NO. 64 Wood Stain & Finish Stripper directly onto surface and apply liberally using a nylon/poly brush or roller. Natural bristle brushes or lambswool applicators are not recommended.
• Due to product thickness, DO NOT use a pump, paint, or other sprayers. The product will clog the tip, resulting in leaking and dripping.
• Always keep surface wet by misting with water and re-apply NO.64 if drying occurs. The finish will begin to lift from the surface. Repeat process as needed to keep the surface wet during the removal period. Most deteriorated finishes will start to lift after about 5-45 minutes. The coating should easily rinse off when ready.
• When the finish starts to lift, scrub the surface using a stiff bristle broom or brush. Rinse thoroughly with water from the garden hose using a nozzle at normal pressure, or use a pressure washer at a low setting (500-1200 PSI). DO NOT USE HIGH PRESSURE as this may harm the wood.
• If some of the old finish remains on the surface, repeat application procedure, or spot sand as needed.
• Follow up with a product such as BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner to remove stains, rejuvenate natural wood colour and to neutralize the stripping action.

Dry TimeBlank space if empty.

• Surfaces must be thoroughly dry before applying any type of new finish, except those finishes that can be applied to dampened wood. Allow the wood to dry for a minimum of 24 hours in warm, dry weather.

DisposalBlank space if empty.

• Biodegradable. Properly dispose of all soiled rags. To recycle or properly dispose of paint in your community, contact your household refuse collection service. PROTECT FROM FREEZING.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.