PREMIUM PLUS^® Interior/Exterior Oil-Based Primer & Sealer No. 434

Where to UseBlank space if empty.

Over properly prepared uncoated and previously painted Interior/Exterior surfaces. Ideal for well-bonded Wallpaper, Steel, Wrought Iron and Wood.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

• All surfaces should be properly prepared and cleaned.
• Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
• Wash bare metal. Rinse and allow to dry. Remove mildew stains with a mildew stain removing product.
• Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
• For new or uncoated wood, use a product such as BEHR PREMIUM^® All-In-One Wood Cleaner No. 63.

ApplicationBlank space if empty.

• Apply when air and surface temperatures are between 7-32° C.
• Stir primer occasionally. Do not thin.
• Product is formulated for use at package consistency only.
• Use a high quality 10-13 mm nap roller cover, natural bristle brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
• Spot prime patched areas first, followed with a complete primer coat.
• Topcoat within 30 days. Two coats may be required.
• Bright or deep colours require a tinted primer.
• Have primer tinted close to topcoat colour with no more than 118 mL of colourant per 3.79 L.

DisposalBlank space if empty.

• For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.​