BEHR^® Metal Primer No. 435

Where to UseBlank space if empty.

• Over properly prepared uncoated and previously painted Interior/Exterior ferrous and non-ferrous metal surfaces.
• Ideal for ferrous metal surfaces, such as: Steel, Carbon Steel, Stainless Steel, Cast Iron, Wrought Iron, Galvanized Steel; and non-ferrous metal surfaces, such as: Brass, Aluminum, Copper, Lead, Nickel, Tin, Titanium, Zinc and Metal Alloys.
• Bright or deep topcoat colours require primer to be tinted (add no more than 4 fluid ounces of colourant per gallon).

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

• All surfaces must be properly prepared, cleaned and primed on the same day.
• Remove all loose or peeling paint; wash off chalk, dirt and grease with mild detergent, rinse well and allow to dry.
• Remove mildew stains with a mildew stain-removing product.
• Scuff sand glossy surfaces and repair imperfections.
• Remove all loose dust and rust particles with a wire brush and dry cloth. In some cases, scraping or sanding may be needed to allow the primer to adhere.
• Do not use if surface is structurally unsound or severely deteriorated.

ApplicationBlank space if empty.

• Apply when air and surface temperatures are between 4-32°C.
  Use a high quality 6- 10mm nap roller cover, nylon/polyester brush or an airless sprayer (.011"-.017" spray tip, 60 mesh filter)
• Stir primer occasionally.
• Do not thin if using a roller or brush; however, if using a sprayer and thinning is necessary to maintain workability, thin with clean water at a rate of no more than 237 mL pint per 3.78L.

DisposalBlank space if empty.

• For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Process Corporation at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.