BEHR PREMIUM^® Cabinet, Door & Trim Semi-Gloss Enamel No. 7120

Where to UseBlank space if empty.

Recommended for interior wood, drywall, masonry, vinyl and other properly prepared and primed surfaces. Ideal for kitchen and bathroom cabinets and doors, windows, trim & moulding.

Usage SummaryBlank space if empty.

Surface Preparation† (Proper Surface Preparation is Required.)Blank space if empty.

• All surfaces must be clean, sound, dry and free of any dirt, oil and grease stains.
• Remove mildew stains with a mildew stain removing product.
• Remove all loose and peeling paint; scuff sand glossy surfaces; caulk and repair imperfections. †Sand all wood surfaces in the direction of the wood grain to the desired smoothness. Remove all dust from sanded surfaces with a damp, lint-free cloth and allow to dry.

PrimeBlank space if empty.

• Priming is recommended on all surfaces. On previously painted surfaces and on new wood, masonry and vinyl surfaces, or on surface with heavy stains, prime with a product such as BEHR^® Kitchen, Bath & Trim Primer & Sealer No. 75 prior to topcoating with this product.
• For best results, sand primer coat prior to topcoating. Follow all label instructions.

ApplicationBlank space if empty.

• Apply when air temperature is between 10-32° C (50-90° F).
• Stir before and during application.
• When working with more than one can of the same product, intermix to ensure colour uniformity.
• Do not thin.
• Brush: Apply a thin coat using a high quality synthetic brush. For best results, apply paint with a high quality 100% Nylon brush.
• Roller: Use a high quality 6 mm nap roller cover.
• Airless Sprayer: .013" - .015" spray tip, 60 mesh filter.
• OPTIONAL: In between coats, sand lightly with 320-400 grit sand paper.
• Certain colours may require 2 or more coats to achieve complete hide.
• NOTE: If touch-up is necessary, same application method is recommended.

Dry TimeBlank space if empty.

• ♦ Darker colours may require additional dry time. Longer dry time required in cooler temperatures and higher humidity.
• Cabinets, doors and windows can be closed as early as 2 hours after final topcoat.
• After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
• Do not use on floors.

DisposalBlank space if empty.

• Properly dispose of all soiled rags.
• For disposal of empty containers and unused product, contact your household refuse collection service.
• To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.

Behr Process Corporation warrants that this product meets Behr's manufacturing specifications. If this product is found not to meet manufacturing specifications upon inspection by our representative, Behr Process Corporation will, at its option and upon proof of purchase (the original receipt), either furnish an equivalent amount of new product or refund the purchase price of this product. This warranty excludes (1) labor and costs of labor for the application or removal any product or (2) any incidental or consequential damages, whether based upon breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.