BEHR PREMIUM^® Semi-Transparent Concrete Stain No. 850

Where to UseBlank space if empty.

For uncoated and unsealed, properly prepared Interior or Exterior Patios, Pavers, Driveways*, Walkways, Garage Floors* and other concrete floors.

• * The composition of concrete varies; therefore, the lack of proper surface preparation and/or over application can lead to automobile tires lifting the product from the surface.
• CAUTION: Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. DO NOT use on areas subject to hydrostatic pressure.

Usage SummaryBlank space if empty.

PreparationBlank space if empty.

The following steps are recommended for best results.

• New concrete must cure for a minimum of 30 days.
• Remove old coating or sealer, if present, using a concrete & masonry paint stripper product.
• Test: Sprinkle a few drops of water onto the surface. If water is quickly absorbed, the surface is ready. If not absorbed, re-etch.
• For proper penetration and adhesion of topcoat, use a product such as a concrete & masonry cleaner & etcher to clean and etch the surface.
• Remove mildew stains with a mildew stain removing product. Follow all label instructions.
• Apply a product such as BEHR PREMIUM^® CONCRETE & MASONRY BONDING PRIMER NO. 880 to increase adhesion of topcoat to the surface. Follow all label instructions.

Optional TopcoatBlank space if empty.

• For added protection, use a product such as BEHR PREMIUM WET-LOOK SEALER NO. 985 for a high-gloss finish or a product such as BEHR PREMIUM LOW-LUSTRE SEALER NO. 986 for a low-gloss finish. Allow stain at least 4 hours to dry before topcoating. Follow all label instructions.

Dry TimeBlank space if empty.

• Longer dry time required in cooler temperatures and in higher humidity. Allow 24 hours for light foot traffic.
• Surfaces may be subjected to light foot traffic after 24 hours. Allow 72 hours before subjecting surface to heavy foot traffic, repositioning furniture or automotive traffic. Park tires on corrugated cardboard for 7 days after applying stain. After 30 days, clean as needed with a mild, non-abrasive liquid detergent.

Clean UpBlank space if empty.

• Clean with soap and water.
• Properly dispose of all soiled rags and protect unused product from freezing.
• For disposal of empty containers and unused paint, contact your household refuse collection service.

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.