BEHR PREMIUM® Elastomeric Masonry, Stucco & Brick Paint
An exterior, flexible high-build coating designed to expand & contract, bridging hairline cracks in vertical masonry surfaces. This extremely durable, mildew & dirt resistant waterproofing finish has superior elasticity & elongation properties to resist cracking. It withstands 98 mph wind-driven rain. The 100% acrylic latex formula provides a breathable film, releasing moisture that builds in walls. It is available in 90 custom tinted colours and computerized colour matching.
Click Here to see available colours.
Finish
Low sheen paint that provides excellent colour retention.
Best For Use In
Properly prepared exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block or Brick as well as adjacent Wood and Metal surfaces. Not for use on horizontal surfaces subject to foot traffic.
Coverage
7-12 m2
PRODUCT USAGE
-
2 Coats
Required -
4-6 HR Dry Time
24 HR Recoat Time -
7-12 m2
-
Soap & Water
Clean-Up
Properly prepared exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block or Brick as well as adjacent Wood and Metal surfaces. Not for use on horizontal surfaces subject to foot traffic.
Preparation
- Allow new stucco and masonry to cure for 30 days before painting.
- Remove all loose, peeling paint. Power wash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
- Remove mildew stains with a mildew stain removing product.
- On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
- Cracks and gaps wider than 1.5 mm should be routed open, dusted and patched with an elastomeric patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
- Prime all uncoated, patched, chalky, wood and/or metal surfaces with a product such as BEHR® NO. 436 Exterior Multi-Surface Primer & Sealer.
Read More
Application
- DO NOT THIN.
- Intermix all cans of same product to ensure colour uniformity. Stir paint before and occasionally during application.
- Use product when air and surface temperature are 10-32˚C. Do not use if rain or heavy dew is expected within 24 hours.
- Apply using a high quality 32 mm nap roller, nylon/polyester brush or airless sprayer (.025"-.029" spray tip).
- A second coat must be applied at the same spread rate as the first.
- A third coat may be required to achieve a final dry mil thickness of about 10-15 mils.
- If airless spraying, use equipment with a minimum of 2,500 PSI at the tip. Maintain a wet edge to avoid lap marks.
- Do not re-spread or re-work paint.
Read More
Dry Time
- Longer dry time required in cooler temperatures and higher humidity.
- After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Read More
Disposal
- Properly dispose of all soiled rags and protect unused product from freezing.
- For disposal of empty containers and unused product contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR PREMIUM® Elastomeric Masonry, Stucco & Brick Paint
See Full SDS, Product Data & SafetyWARRANTY
LIFETIME LIMITED GUARANTEE: Behr Paint Company warrants to you, the original residential consumer purchaser, that this product will provide a waterproof finish and hide hairline cracks existing at the time of original product application for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. THIS WARRANTY EXCLUDES WATER INTRUSION DUE TO STRUCTURAL DEFECTS AND/OR CAULK FAILURE. Colour fading and chalking will occur naturally over time. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec. THIS WARRANTY EXCLUDES (1) LABOUR AND COSTS OF LABOUR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON BREACH OF EXPRESS OR IMPLIED WARRANTY, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591, or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all applications of the product prior to processing your claim made under this warranty.
