BEHR® Masonry, Stucco & Brick Paint - Flat

Average Rating:
false

A high-quality, flat acrylic latex paint with excellent hiding properties. This int/ext, self-priming, mildew resistant finish also provides excellent adhesion & water repellency on properly prepared int/ext smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 yrs. in all climatic conditions and cleans up with soap & water.

Click Here to see available colours.

Finish
Flat Finish
Best for use in
Properly prepared Interior or Exterior vertical surfaces as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal.
Coverage
Rough: 23-28 m2 ; Smooth 37 m2

Read important application instructions to ensure optimum paint performance.

Pink and purple colored brush strokes

Find Your Perfect Colour!

Find, Coordinate & Preview Paint Colours

Explore our colour library. Browse our collections of popular and trending colours.  Find coordinating colours then preview them in your own virtual room image. Do it all with ColourSmart by BEHR®.

Explore Colour Now

Sold Exclusively at
The Home Depot

Find a Home Depot store near you.

Light blue and light green brush strokes

Product Usage

Clock icon

2-3 HR Dry Time 
4 HR Recoat Time

Paint coverage icon.

Spread Rate:
Rough: 23-28 m2
Smooth: 37 m2

Soap and water cleaning a paint brush icon

Soap & Water
Clean-Up

Thermometer Icon

Protect
from Freezing

Where to Use

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Usage Summary
Preparation

Proper surface preparation is required.

  • Allow new stucco and masonry to cure for 30 days before painting.
  • Remove all loose, peeling paint. Powerwash to remove chalk. Remove dirt and grease with a product such as BEHR PREMIUM® NO. 990 Concrete & Masonry Degreaser & Cleaner.
  • Remove mildew stains with a mildew stain removing product.
  • On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. 991 Concrete & Masonry Cleaner & Etcher to prepare the surface. Follow all label instructions. Rinse thoroughly and allow a minimum of 24 hours to dry.
  • Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound. Use an acrylic caulk around windows, doors and trim. Scuff sand glossy surfaces.
  • If chalk remains on the surface, prime with a product such as BEHR PREMIUM PLUS® NO. 436 Exterior Multi-Surface Primer & Sealer.
  • Prime all patched areas as well as adjacent wood and metal surfaces.
  • If previously sealed or coated, check manufacturer's specifications before painting.
Application
  • DO NOT THIN.
  • Intermix all cans of same product to ensure colour uniformity. Stir paint before and occasionally during application.
  • Use product when air and surface temperature are 10-32˚C. Do not use if rain or heavy dew is expected within 24 hours.
  • Apply using a high quality 19-25 mm nap roller, nylon/polyester brush or airless sprayer (.015"-.017" spray tip).
  • Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.
  • Do not re-spread or re-work paint.
Dry Time
  • Longer dry time required in cooler temperatures and higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Disposal
  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product, contact your household refuse collection service.

Read Application Instructions

LIMITED WARRANTY

Behr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 20 years from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read Warranty Information

BEHR® Masonry, Stucco & Brick Paint - Flat is rated 4.8 out of 5 by 96.
Rated 5 out of 5 by from Excellent cover Applied an off white coat to standard red brick. Easy to apply. Second coat not necessary.
Date published: 2019-01-30
  • y_2019, m_10, d_14, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_96
  • loc_en_US, sid_1015009000010-E_CA, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_behr
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 61ms
  • REVIEWS, PRODUCT

How-To

Find step-by step instructions in our how-to articles and videos.