It is often best to remove old wallpaper, rather than trying to paint over it, to ensure your newly applied wall colour looks its best.
For Best Results:
Make sure you allow time for your stripper solution to soak into the wallpaper.
Using a scoring tool, create perforations in the wallpaper. This will allow the wallpaper remover to penetrate through to the wall.
Following the manufacturer's directions, mix the appropriate ratio of wallpaper stripper and water in an empty plastic 18.9L container.
Using a sponge, apply the remover mixture to a 1.2 x 1.2 meter section. Allow the mixture to soak on the surface for a minimum of 5 minutes. Do not allow it to dry.
Starting in a corner of the wall, peel back the wallpaper in a 1.2 x 1.2 meter section. Repeat the process until all the wallpaper has been removed.
Loosen the stubborn wallpaper sections using a scraper. If some paper backing remains, continue wetting and scraping the area until all the backing has been removed.
Using a scrub brush, scrub the surface to loosen the remaining glue.
To remove the solution and glue residue, wipe the area with a water-dampened sponge or rag.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.Calculate
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.Get Expert Help
So many colours and so many ideas: Visit Behr’s Colour Studio for inspiration, colour tools, design advice and everything you need to find your project’s perfect colour.COLOUR STUDIO