Protect your surfaces from corrosion, spalling, efflorescence and freeze-thaw damage with our premium waterproofer.
For Best Results:
Make sure your surface is cleaned and prepped before applying the waterproofer.
For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers
For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone
For coated concrete: refer to: Preparation of Coated Concrete for Sealers
After the surface is cleaned and prepped, apply the BEHR PREMIUM® Protector and Waterproofer until the surface is saturated. Apply the product to a dry surface with a brush, roller or garden sprayer.
Remove any puddles by spreading product to drier areas or by wiping off excess with a clean cloth.
On vertical surfaces, apply the waterproofer from the bottom up and saturate thoroughly.
Once dried, rough, vertical surface may be coated with an oil or latex-based paint or primer. DO NOT paint horizontal surfaces after applying this product.
Clean up with soap and water.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.Calculate
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.Get Expert Help
So many colours and so many ideas: Visit Behr’s Colour Studio for inspiration, colour tools, design advice and everything you need to find your project’s perfect colour.COLOUR STUDIO