Removing flaking old paint from your exterior surfaces before applying a fresh coat will help ensure better adhesion.
For Best Results:
Don't forget to dust off the debris after you finish scraping off the flaking paint.
Using a scraper, wire brush, or 80 to 100-grit sandpaper, remove any loose or peeling paint from the damaged area. Remove any dust or debris from the area with a lightly water-dampened rag.
Using a putty knife, apply a thin layer of patching material to the damaged area. Allow it to dry.
Use 220-grit sandpaper to smooth the patched area and make it even with the surface.
Remove any final dust or debris from the finished repair.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.Calculate
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.Get Expert Help
So many colours and so many ideas: Visit Behr’s Colour Studio for inspiration, colour tools, design advice and everything you need to find your project’s perfect colour.COLOUR STUDIO