BEHR ULTRA™ Interior Hi-Gloss Enamel
Excellent durability and beauty combine to create stunning performance and impact for many high-use Interior surfaces. This Hi-Gloss is focused specifically on high targeted performance for Interior surfaces, without needing to worry about compromises often required when an Interior / Exterior combination is chosen.
*A primer coat may be needed on some surfaces. See label for details.
Finish
This hi-gloss enamel paint has a bright, shiny radiant sheen that has a durable, glass-like enamel finish. Resistant to moisture, stains and scuffs with an antimicrobial-mildew resistant.
Best For Use In
Interior Surfaces. Excellent for Kitchens, Bathrooms, Trim, Cabinets, Interior Furniture
Coverage
23-37 m2
PRODUCT USAGE
-
1 HR Dry Time
2 HR Recoat Time -
23-37 m2
Coverage -
Soap & Water
Clean-Up -
Protect
from Freezing
Properly prepared coated and uncoated Interior surfaces. Excellent for Kitchens, Bathrooms, Trim, Cabinets, Interior Furniture.
Preparation & Prime†
- All surfaces should be properly prepared and cleaned. Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
- Remove mildew stains with a mildew stain remover. Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry.
- Allow new stucco, plaster and masonry to cure for 30 days before painting.
- Use BEHR ULTRA paint as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
- Lock in stains with BEHR ULTRA as a spot primer.
- For heavy stains, test for stain bleed-through by applying BEHR ULTRA as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before top coating.
- For drastic colour changes or when applying deep colours denoted with a dagger (†) on the colour chip, apply a tinted primer coat of BEHR ULTRA if needed.
Read More
Application
- Apply when air and surface temperatures are between 10-32°C.
- Stir paint occasionally. Intermix containers of same product to ensure colour and sheen uniformity.
- Use a high quality 10-13 mm nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
- Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 250 mL per 3.79 L. Certain colours may require more than one coat for complete hide.
- Darker colours may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
- After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
- Do not use on floors.
Read More
Disposal
- For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Quebec: This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Paint Company unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-661-1591 or contact Behr Paint Company at 110-600 Barlow Square S.E., Calgary, AB T2C 5T7. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
