AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

KILZ 2® ALL-PURPOSE No. 2000

Avg. Rating:

KILZ 2 ALL-PURPOSE Primer (Previously KILZ 2 Latex) is a fast-drying, water-based, multi-surface primer-sealer-stainblocker with excellent adhesion, mildew resistance, sealing properties and very mild odor. KILZ 2 ALL-PURPOSE Primer blocks medium stains including minor water stains, rust, grease, ink, pencil and felt marker. Enhanced hiding makes it ideal for changing colours and helps lessen the number of coats of paint required.

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Sheen levels depend on porosity and various surface irregularities.

Best for use in

Use on interior and exterior surfaces including woodwork, drywall, plaster, paneling, masonry, brick, painted metal and properly prepared glossy surfaces†. Use under or over water-based or oil-based paints. Not recommended on flooring.

Coverage

27-37 m2 per 3.79 L depending on the surface texture, porosity and application method. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Clock icon

    30 Min Dries to Touch

    1 HR Ready to Topcoat

  • Paint coverage icon.

    27-37 m2 
    Coverage per 3.79 L

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Use on interior and exterior surfaces including woodwork, drywall, plaster, paneling, masonry, brick, painted metal and properly prepared glossy surfaces†.
  • Use under or over water-based or oil-based paints.
  • Not recommended on flooring.

Preparation†

The following steps are recommended for product performance.

  • All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
  • Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming.
  • †Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.* Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.*
  • Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.
  • Masonry, Brick, Stucco and Plaster: KILZ 2 ALL-PURPOSE Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2 ALL-PURPOSE Primer.
  • Fire Restoration: It is critical to clean damaged surfaces thoroughly before priming. Primer recommendations: Water-based primers such as KILZ® RESTORATION or oil based primers such as KILZ® ORIGINAL (interior use).

Read More

Application

  • Eye protection is recommended. For spray applications, a small amount of water (no more than 15 ml per 3.79 L) may be added.
  • Do not thin for stainblocking applications. Only apply if surface, air and product temperatures are between 10°-32°C.
  • Stir thoroughly before and occasionally during use.
  • Brush – High quality Nylon/Polyester.
  • Roller – High quality 10 - 13 mm nap on smooth surfaces or 13 - 19 mm nap on semi-rough or porous surfaces.
  • Airless spray – .017 - .021 tip / 60 mesh filter
  • Prime the entire surface to ensure a uniform appearance of the topcoat.
  • Stainblocking: KILZ 2 ALL-PURPOSE Primer is formulated to block light or medium stains. For heavy stains use oil based primers such as KILZ® ORIGINAL or water based primers such as KILZ® RESTORATION and KILZ® 3 PREMIUM.

  • Tinting: KILZ 2 ALL-PURPOSE Primer may be tinted with up to 60 ml of universal colourant per 3.79 L.
  • Tinting to a lighter shade than the topcoat is recommended. Coverage: 28 - 37 m² per 3.79 L depending on the application method and surface porosity.
  • Dry Time @ 25°C / 50% RH: Touch in 30 minutes. Paint in 1 hour.

Read More

Clean up & Disposal

  • Clean equipment and paint spatters with warm, soapy water.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
  • If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.

Read More

To consult with a Behr Company Representative, call 1-800-661-1591.

Read More

Read More

WARRANTY

For one year from the date of purchase, Masterchem Industries LLC warrants to the original residential consumer purchaser (1) that the product meets Masterchem Industries LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event that this product proves to be defective within one year from the date of purchase, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

Pro Contractor wearing a cap and shirt with Behr

PAINTING CONTRACTORS

Professional products and services specifically designed for residential and commercial painting contractors.

FOR CONTRACTORS
A small image of a Property Manager showing a BEHR PRO Rep a multi-family complex. The property manager is pointing at something while the BEHR PRO Rep is looking at what she is pointing and taking notes on a laptop.

PROPERTY & FACILITY MANAGERS

A full range of products and services to help property and facility managers enhance and maintain the appearance of properties.

FOR PROPERTY MANAGERS

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-661-1591
Mon - Fri, 6am-3pm PST
Sat. & Sun., Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Get 10% - 20% Back in Quarterly Rewards
BEHR® Paints, Stains & Primers.

sign up on homedepot.ca